The powerful universal mortar for concrete and masonry

Injection mortar FIS V Plus

Name: Injection mortar FIS V Plus
Brand: fischer

The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures.

Product Variant

Approvals / Test reports

54 product variants

Languages on the cartridge

Contents

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

More results

Viewed 18 of 54 variant (s)

Advantages

The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications.
The ETA assessment for a service life of 100 years offers permanent safety for all applications.
The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions.
FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures.
The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths.
The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications.

Applications

Steelwork constructions
Timber constructions
Guard rails
Façades
Staircases
Steel brackets
Machines
Masts
Awnings
Canopies
Gates
Consoles
Pipelines
Gratings
Satellite antennas

Building materials

Approved for anchorings in:

Concrete C20/25 to C50/60, cracked and non-cracked
Hollow blocks made from lightweight concrete
Hollow blocks made from concrete
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Aerated concrete
Solid brick

Approved for:

Rebar connections
Remedial wall tie VBS 8
Weather facing reconstruction system FWS II
Stand-off installation TherMax

You can find detailed information on building materials in the approval document.

Approval

ETA-20/0603
ETA-20/0728
ETA-20/0729
DoP No. 0231
DoP No. 0232
DoP No. 0331
ESR-2786
18050 /15511 /CT /FA
20046/15515
22044-enshort
EPDDBCFIW20220088IBE2DE

Functionality

FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
The mortar is extruded bubble free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
The injection cartridges are quick and easy to use with the fischer dispensers.
Partially used cartridges can be reused by changing the static mixer.

Installation in concrete with FIS V Plus and FIS A / RG M

Installation in concrete with FIS V Plus and RG M I

Installation in solid brick with FIS V Plus and FIS A

Installation in hollow blocks with FIS V Plus and FIS HK + FIS A

Installation in aerated concrete with FIS V Plus and FIS A / RG M

Installation in undercut drill hole in aerated concrete with FIS V Plus and FIS A / RG M

ETA Certification Document

pdf, ETA-20/0603

European Technical Assessment for Injection System fischer FIS V Plus - Bonded anchor for use in concrete

Created on 11/13/2020

DOP - Declaration of Performance

pdf, DoP No. 0231

Declaration of Performance for fischer injection system FIS V Plus (Bonded fastener for use in concrete)

Created on 11/27/2020

ETA Certification Document

pdf, ETA-20/0728

European Technical Assessment for Rebar connection with fischer injection system FIS V Plus - Systems for post-installed rebar connections with mortar

Created on 12/16/2022

DOP - Declaration of Performance

pdf, DoP No. 0331

Declaration of Performance for fischer injection system FIS V Plus (Mortar for post-installed rebar connections)

Created on 01/02/2023

ETA Certification Document

pdf, ETA-20/0729

European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry

Created on 11/26/2020

DOP - Declaration of Performance

pdf, DoP No. 0232

Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)

Created on 12/10/2020

ICC Certification

pdf, ESR-2786

ICC-ES Evaluation Report

Valid from 01/01/2022
to 04/30/2024

Test report (fire protection)

pdf, 18050 /15511 /CT /FA

Report on fire evaluation of post installed rebar connections with fischer FIS V / FIS VS Low Speed injection system

Created on 01/07/2019

Test report (fire protection)

pdf, 20046/15515

Report on fire evaluation of post installed rebar connections with fischer FIS V Plus / FIS V Plus Low Speed injection system

Test report (fire protection)

pdf, 22044-enshort

Fire resistance of fischer injection system FIS V Plus under fire exposure acc. to DIN EN 1363-1

EPD - Environmental Product Declaration

pdf, EPDDBCFIW20220088IBE2DE

Environmental Product Declaration for fischer Injection Mortar FIS V Plus, FIS VW Plus, FIS VS, FIS HB and FIS SB

Valid from 03/24/2022
to 03/24/2025

Curing Times

pdf,

Curing times for injection mortar FIS VW Plus High Speed / FIS V Plus / FIS VS Plus Low Speed

Installation Instructions

pdf,

FIS V Plus

Load Table

pdf,

Injection system FIS V Plus with internal threaded anchor RG M I - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Injection system FIS V Plus with threaded rod FIS A resp. RG M - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Injection system FIS V Plus with threaded rod FIS A in solid and perforated masonry - Permissible loads 2) for a single anchor in masonry for pre-positioned installation.

Marketing Documents

pdf,

FIS V Plus.

Safety Data Sheet

pdf,

Safety data sheet for 569074 FIS V Plus 300 T

Safety Data Sheet

pdf,

Safety data sheet for 563286 FIS VW Plus 300 T

Safety Data Sheet

pdf,

Safety data sheet for 558759 FIS VW Plus 360 S

Technical Data Sheet

pdf,

Injection Mortar FIS VW Plus 360 S / FIS VW Plus 410 C

Safety Data Sheet

pdf,

Safety data sheet for 558763 FIS V Plus 360 S

Technical Data Sheet

pdf,

Injection Mortar FIS V Plus 360 S

Safety Data Sheet

pdf,

Safety data sheet for 558765 FIS VW Plus 360 S

Safety Data Sheet

pdf,

Safety data sheet for 558745 FIS V Plus 360 S

Safety Data Sheet

pdf,

Safety data sheet for 558750 FIS VS Plus 360 S

Safety Data Sheet

pdf,

Safety data sheet for 558756 FIS V Plus 360 S HWK big

Safety Data Sheet

pdf,

Safety data sheet for 558770 FIS V Plus 360 S HWK small

System components

ETA-approval
Languages on the cartridge	EN, FR, AR
Contents	20 x cartridge 300 ml, 40 x static mixer FIS MR Plus
Amount	20 pcs.
GTIN (EAN-Code)	4048962452662

ETA-approval
Languages on the cartridge	IT, DE, EN
Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus
Amount	1 pcs.
GTIN (EAN-Code)	4048962452600

ETA-approval
Languages on the cartridge	EN, ES, PT
Contents	1 x cartridge 300 ml, 2 x static mixerFIS MR Plus
Amount	1 pcs.
GTIN (EAN-Code)	4048962452709

ETA-approval
Languages on the cartridge	DE, FR, NL
Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus with transparent clip
Amount	1 pcs.
GTIN (EAN-Code)	4048962452570

ETA-approval
Languages on the cartridge	DA, SV, NO, FI
Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus with transparent clip
Amount	1 pcs.
GTIN (EAN-Code)	4048962493320

Injection mortar FIS V Plus

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading

ETA-approval
Languages on the cartridge	DE, EN, FR, IT, NL
Contents	1 x cartridge 825 ml, 2 x static mixer FIS JMR 825
Amount	1 pcs.
GTIN (EAN-Code)	4048962479805

ETA-approval
Languages on the cartridge	EN, ES, PT, FR, TR
Contents	1 x cartridge 825 ml, 2 x static mixer FIS JMR 825
Amount	1 pcs.
GTIN (EAN-Code)	4048962479812

ETA-approval
Languages on the cartridge	EN, PL, RU, CS, SK
Contents	1 x cartridge 825 ml, 2 x static mixer FIS JMR 825
Amount	1 pcs.
GTIN (EAN-Code)	4048962479829

ETA-approval
Languages on the cartridge	PL, RU, HU, CS
Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus
Amount	1 pcs.
GTIN (EAN-Code)	4048962452655

ETA-approval
Languages on the cartridge	DE, EN, IT, HU
Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus
Amount	1 pcs.
GTIN (EAN-Code)	4048962452716

ETA-approval
Languages on the cartridge	ES, PT
Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus with transparent clip
Amount	1 pcs.
GTIN (EAN-Code)	4048962452563

ETA-approval
Languages on the cartridge	PL, HU, EL, RO
Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus with transparent clip
Amount	1 pcs.
GTIN (EAN-Code)	4048962452686