The internal threaded anchor for masonry and aerated concrete
Internal threaded sockets FIS E
The fischer internal threaded anchor FIS E is a system component for use with the fischer injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green for fixations in masonry made from solid brick, perforated brick, and aerated concrete. When the threaded anchor is installed, the mortar is pressed through the grating structure and creates a form fit with the structure of the brick. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the FIS E is particularly suited to detachable and temporary fixings both inside and outside. The approvals of the various injection mortars must be observed.
The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
Please refer to the approvals for the mortar used.
Application and approval
Applications
Removable and temporary fixings
Anchorings with the injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green in masonry and aerated concrete
Building materials
Approved for:
Solid sand-lime brick
Perforated sand-lime brick
Solid brick
Solid blocks made from lightweight concrete
Vertically perforated brick
Hollow blocks made from lightweight concrete
Building brick
Aerated concrete blocks
Also suitable for:
Solid and lightweight concrete blocks
Solid pumice and other solid building materials
You can find detailed information on building materials in the approval document.
Approval
ETA-10/0383
ETA-15/0263
Assembly instruction
Functionality
The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW. FIS VL or FIS P can be used but do not have approvals.
FIS E is suitable for pre-positioned installation.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
The anchor is set manually, by lightly rotating it until it reaches the drill hole base.
Documents for Downloading
ETA Certification Document
pdf,
22.1 MB
ETA-10/0383
European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry
Created on 07/07/2020
ETA Certification Document
pdf,
8.4 MB
ETA-15/0263
European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry