The fischer bolt anchor FAZ II HBS with its washer as per the wood construction standard DIN 1052 is the ideal steel anchor for the highest requirements. The anchor is made from zinc-plated and stainless steel and is perfect for the fixation of sills and beams. The large washer ensures even better force transfer. Thanks to the two anchorage depths and the easy assembly process, the FAZ II HBS can be used particularly flexibly. The tried-and-tested expansion clip introduces the loads into the concrete particularly powerfully and enables a top load-bearing capacity.
The FAZ II HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example.
Furthermore, the bolt anchor FAZ II HBS offers all of the advantages of the FAZ II.
The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic C1 and C2). The ICC approval applies only for standard anchorage depths.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).
Application and approval
Applications
Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams
Building materials
Approved for:
Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber concrete
Also suitable for:
Concrete C12/15
Natural stone with dense structure
You can find detailed information on building materials in the approval document.
Approval
ETA-05/0069
DoP No. 0186
Z -21.1-2145
Assembly instruction
Functionality
The FAZ II HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations.
Before installation, place the hex nut and washer as per the wood construction standard into the optimum position.
When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The anchor is set in accordance with the approval once the prescribed installation torque is achieved.
In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
Documents for Downloading
ETA Certification Document
pdf,
2.3 MB
ETA-05/0069
European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete
Created on 04/24/2020
DOP - Declaration of Performance
pdf,
2.4 MB
DoP No. 0186
Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)
Created on 05/15/2020
DIBt, National German Certification
pdf,
175.2 KB
Z -21.1-2145
General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete
