Art.-No. 522952

fischer bolt anchor FAZ II 12/120 HBS wood construction washer

Top Features

With washer in line with timber construction standard DIN 1052. This allows for enhanced force transmission when fixing timber constructions.
With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
Minimum torque slippage: Simple assembly saves time as well as wear and tear.
ETA approval for cracked concrete and fire inspection: maximum safety.
One anchor - two anchorage depths: Reduced anchorage depth saves time and costs while drilling. Also ideal for large fixture thicknesses.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

For highest demands. Powerful and flexible.

Advantages

The FAZ II HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example.
Furthermore, the bolt anchor FAZ II HBS offers all of the advantages of the FAZ II.
The international approvals guarantee maximum safety and the best performance. These approvals even cover use in earthquake zones (seismic C1 and C2). The ICC approval applies only for standard anchorage depths.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

The fischer bolt anchor FAZ II HBS with washer in line with timber construction standard DIN 1052 is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the two anchorage depths and simple mounting, the FAZ II HBS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The version made of zinc-plated steel is used to fix timber constructions. The steel anchor is, for example, suitable for fixing beams and sills.

Applications

Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber concrete

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the approval document.

Approval

ETA-05/0069
DoP No. 0186
Z-21.1-2145
3023222

Functionality

The FAZ II HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations.
Before installation, place the hex nut and washer as per the wood construction standard into the optimum position.
When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The anchor is set in accordance with the approval once the prescribed installation torque is achieved.
In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Push-through installation with hexagon nut

1 / 5

1 / 6

Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	210 mm
Anchor length ( l )	225 mm
Thread ( ø x length )	M12 x 171 mm
Width across nut	19 mm
Washer (outer diameter x thickness)	58 x 6 mm
Anchorage depth (standard) ( h_{ef, stand.} )	70 mm
Max. usable length hef,stand./hef,min. ( t_fix )	120 / 140 mm
Anchorage depth (reduced) ( h_{ef, red.} )	50 mm
Max. fixture thickness (reduced) ( t_fix )	140 mm
Max. fixture thickness (standard) ( t_fix )	120 mm
Packaging	Folding box
Amount	20 pcs.
GTIN (EAN-Code)	4048962182477