For highest demands. Powerful and flexible.

Bolt anchor FAZ II

Name: Bolt anchor FAZ II
Brand: fischer

The fischer bolt anchor FAZ II is a steel anchor for the highest requirements. Heavy loads can be secured in cracked concrete using the steel anchor. Thanks to its easy installation, the FAZ II can be used extremely flexibly. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables top load-bearing capacity. The steel anchor is ideal for the anchoring of railings, cable trays and cantilevers, for example.

Product Variant

Approvals / Test reports

96 product variants

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Max. usable length hef,stand./hef,min.

Thread

Width across nut

Legend = Permission Available— = Permission not Available

More results

Viewed 18 of 96 variant (s)

Advantages

According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time.
The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
The international approvals guarantee maximum safety and the best performance.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber concrete

Also suitable for:

Concrete C12/15
Concrete C80/95 (classification available)
Natural stone with dense structure

You can find detailed information on building materials in the approval document.

Approval

ETA-05/0069
DoP No. 0186
Z-21.1-2145
ESR-2948
3023222

Functionality

The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS anchor bolt setting tool.

Push-through installation with hexagon nut

ETA Certification Document

pdf, ETA-05/0069

European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete

Created on 04/24/2020

DOP - Declaration of Performance

pdf, DoP No. 0186

Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)

Created on 05/15/2020

DIBt, National German Certification

pdf, Z-21.1-2145

General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete

Valid from 07/12/2022
to 07/12/2027

ICC Certification

pdf, ESR-2948

ICC-ES Evaluation Report

Valid from 05/01/2023
to 01/31/2024

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

Load Table

pdf,

Bolt anchor FAZ II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

System components

Similiar product categories

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	60 mm
Anchor length ( l )	65 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Thread ( Ø x length )	M6 x 25 mm
Width across nut	10 mm
Contents	—
Packaging	—
Amount	50 pcs.
GTIN (EAN-Code)	4048962298949

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	20 / - mm
Thread ( Ø x length )	M6 x 35 mm
Width across nut	10 mm
Contents	—
Packaging	—
Amount	50 pcs.
GTIN (EAN-Code)	4048962298956

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 20 mm
Thread ( Ø x length )	M8 x 38 mm
Width across nut	13 mm
Contents	—
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209948712

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Thread ( Ø x length )	M8 x 38 mm
Width across nut	13 mm
Contents	—
Packaging	—
Amount	1 pcs.
GTIN (EAN-Code)	4006209405499

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Thread ( Ø x length )	M8 x 38 mm
Width across nut	13 mm
Contents	2 x FAZ 8/10
Packaging	Blister card
Amount	2 pcs.
GTIN (EAN-Code)	4006209909195

Bolt anchor FAZ II

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading