The fischer universal plug UX Green is a nylon plug made from renewable raw materials. The proportion of regenerative material is more than 50%. The universal plug expands in solid building materials and knots in hollow and panel building materials for maximum hold. This makes the fischer UX Green always the right choice – even if the for unknown building materials. The edge prevents it from slipping deeper during installation. In the version without edge, and larger anchorage depths, the fischer universal plug UX is suitable for push-through installation. The fischer universal plug UX Green is available in sizes 6x35 to 12x70 and optionally with screw or hook. It can be be used with wood, chipboard as well as stud screws.
Produced with at least 50% renewable raw materials and therefore particularly environmentally friendly.
Just as effective, secure and durable as regular UX plugs.
The universal operating principle (knotting or expanding) allows for use in all solid, hollow and board building materials. Thus the UX Green is the correct choice for unknown base materials.
Plug collar for anti-slip safety and saw tooth sides as turning lock ensure the highest installation safety.
Application and approval
Applications
Pictures
Lighting
Skirting
Light cabinets
Towel rails
Mirror cabinets
Curtain rails
Wash basin fixings
TV consoles
Plumbing and heating fixings
Building materials
Concrete
Gypsum plasterboard and gypsum fibreboards
Vertically perforated brick
Hollow blocks made from lightweight concrete
Cavity floor slabs made from bricks and concrete
Perforated sand-lime brick
Solid sand-lime brick
Natural stone
Aerated concrete
Chipboard
Solid panel made from gypsum
Solid brick made from lightweight concrete
Solid brick
You can find detailed information on building materials in the approval document.
Assembly instruction
Functionality
The Universal plug UX with rim is suitable for pre-positioned installation; the UX without rim is suitable for push-through installation.
When screwing in the screw, the UX Green expands in solid building materials and knots itself into cavities.
Suitable for woodand chipboard screws, as well as stud screws.
The required screw length is given by:
the plug length + fixture thickness + 1x screw diameter.
In the case of board building materials, the threadless part of the screw must not be longer than the fixture.
The edge distance must be at least one plug length.
