To repair over-sized or damaged drill holes

Repair pad FixIt

Name: Repair pad FixIt
Brand: fischer

The repair pad FIX.it is a solution for installing a plastic fixing into a too-large or fractures drill hole. As a result the existing drill hole can be used. fischer FIX.it is a repair pad covered with a special mortar. This is moistened before use, wound around the plug and pushed into the fractured or too-large drill hole. For larger tolerances, the pads can also be used in layers. The repair pad is hardened after just three minutes. This saves time during the installation process.

Product Variant

Download of image data

Product Variant

1 product variants

Contents

Packaging

Amount

GTIN (EAN-Code)

Viewed 1 of 1 variant (s)

Advantages

Using FixIt means that you can avoid having to drill another hole, and makes it possible to reuse a pre-existing drill hole.
The repair pad FixIt can be used as a single layer or as multiple layers, and thus can be flexibly adapted to suit various drill hole sizes and shapes.
The pad, which is covered with a special mortar, hardens after only approx. three minutes in the drill hole. This allows for a fast installation of the fixture.

Applications

To repair over-sized or damaged drill holes for use with plastic plugs

Building materials

Concrete
Cavity floor slabs made from bricks and concrete or similar
Vertically perforated brick made from lightweight concrete
Solid sand-lime brick
Natural stone with dense structure
Aerated concrete
Solid brick made from lightweight concrete
Solid brick

You can find detailed information on building materials in the approval document.

Functionality

The pad, which is covered with a special mortar, hardens in the drill hole, thus anchoring the plug securely in the damaged or over-sized drill hole.
Wet the pad with water, wrap it around the plug and push it into the damaged drill hole.
After about three minutes the special pad will harden and the fixture can then be attached.
Use several pads for larger tolerances.
The curing time for the first pad is approx. three minutes. Add an additional minute for each additional pad used.

Installation FixIt

1 / 7

1
2
3
4
5
6
7

Repair pad FixIt

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Contents	Card with 10 FixIt pads
Packaging	Blister card
Amount	10 pcs.
GTIN (EAN-Code)	4006209925072