Use of damaged drill hole. No new drill hole required.
Flexible adjustment to various drill hole diameters and shapes.
Fast installation of the fixture. The repair pad is already cured after three minutes.
Die Vorteile / Produktbeschreibung
To remedy over-sized or damaged drill holes.
Advantages
Using FixIt means that you can avoid having to drill another hole, and makes it possible to reuse a pre-existing drill hole.
The repair pad FixIt can be used as a single layer or as multiple layers, and thus can be flexibly adapted to suit various drill hole sizes and shapes.
The pad, which is covered with a special mortar, hardens after only approx. three minutes in the drill hole. This allows for a fast installation of the fixture.
The fischer repair fleece FIX.it is a repair fleece coated with special mortar. This is moistened before processing, wrapped around the plug and then inserted into the damaged or oversized drill hole. The fleeces can be used in several layers in case of larger tolerances.
Anwendung und Zulassung
Applications
To repair over-sized or damaged drill holes for use with plastic plugs
Building materials
Concrete
Cavity floor slabs made from bricks and concrete or similar
Vertically perforated brick made from lightweight concrete
Solid sand-lime brick
Natural stone with dense structure
Aerated concrete
Solid brick made from lightweight concrete
Solid brick
Es gelten die Details (Baustoffe, Lasten, etc.) der ggf. verfügbaren Zulassung. Weitere Dokumente finden Sie im Download Center.
Montageanleitung
Functionality
The pad, which is covered with a special mortar, hardens in the drill hole, thus anchoring the plug securely in the damaged or over-sized drill hole.
Wet the pad with water, wrap it around the plug and push it into the damaged drill hole.
After about three minutes the special pad will harden and the fixture can then be attached.
Use several pads for larger tolerances.
The curing time for the first pad is approx. three minutes. Add an additional minute for each additional pad used.
