Stainless steel adjustable hook with large base for the installation of PV panels on pitched tile roofs with ventilation layer.
Stainless steel hook with large base RH HB A2
RH 40-54 HB A2 is the stainless steel hook for the installation of PV panels on tiled roof with ventilation layer. The multiple adjustments make the hook suitable for every kind of tile. Complete with screws for connection to the rail.
10 hooks RH HB A2 10 hex head screws SKS M8 x 20 A2 10 hexagonal nuts MU F M8 A2
10 [pcs.]
Total height
110 - 143 mm
Installation torque (
Tinst
)
20 Nm
Width across nut
13 mm
Weight
0,83 kg
Contents
10 hooks RH HB A2 10 hex head screws SKS M8 x 20 A2 10 hexagonal nuts MU F M8 A2
Amount
10 pcs.
GTIN (EAN-Code)
8001132715260
Viewed 1 of 1 variant (s)
Your advantages / Product description
Advantages
The multiple adjustments allow to adapt the hook to different tiles and ventilation layers: the horizontal base adjustment allows to offset the fastening point from the exit point of the hook from the tile; the lower vertical adjustment allows to adapt the hook to different thicknesses of tiles and ventilation layers; the upper vertical adjustment allows to record the distance of the rail from the top of the tile; the higher adjustment allows to horizontally align the rail.
The 5 mm thickness allows a reduced tile grinding.
Made of resistant stainless steel.
The accessories for connecting to the Solar rails are included in the package.
Properties
X5CrNi 18-10 stainless steel hook in accordance with EN 10088-2:2005.
Class A2-70 stainless steel bolts in accordance with EN ISO 3506-1/2:2010.
Application and approval
Applications
PV panels installation on pitched roofs with tiles with ventilation layer.
Assembly instruction
Functionality
Determine the centre distance of the hooks according to the snow and wind loads in the installation area (use SOLARPANEL-FIX software to design the system) and according to the load-bearing structure and system layout.
Lift the tile and secure the base of the hook using the appropriate anchor determined according to the type and layers of the load-bearing support.
Make the height and width adjustments required by the type of roofing and tighten the screws of the adjustments applying a 20 Nm torque to lock the hook in position.
Grind the upper tile to fit the hook shape and put it back in position.
Use the existing slot in the higher part of the hook to adjust the selected rail position.
Fasten the rail tightening the screw with a 10 Nm torque.
