Hammer nut with clip for quick insertion into the rail
Integrated spring to facilitate PV panel positioning
Clamp and nut in AW 6060 T66 aluminium, screw in A2-70 stainless steel, clip in PA 6
Accessori
Art. n. 572209
SolarFish H33 2.50 m AL
Art. n. 572210
SolarFish H33 3.65 m AL
Art. n. 572211
SolarFish H33 4.85 m AL
Art. n. 572451
SolarFish H33 3.65 m AL black
Art. n. 576307
SolarFish H44 2.50 m AL
Art. n. 518645
SolarFish H44 3.35 m AL
Art. n. 569371
SolarFish H44 3.65 m AL
Art. n. 570766
SolarFish H44 3.65 m AL black
Art. n. 558358
SolarFish H44 4.45 m AL
Vantaggi / descrizione del prodotto
The pre-assembled end clamp for PV modules with aluminium frame
Advantages
Thanks to the spring, the PM pre-assembled clamps remain raised during the tightening phases and thanks to the plastic element, they stay in position without sliding in the rail.
The pre-assembled PM F clamps do not require any additional elements like screws, gaskets or bolts.
PM F is the pre-assembled clamp for PV panels with aluminium frame. Available in the PM F end clamp or PM C central clamp variants. The PM clamp is available in different variants depending on the thickness of the PV panel. PM F features a hammer nut with a special plastic cage to facilitate positioning of the nut inside the central groove of the rail. The spring keeps the clamp raised until it is tightened to facilitate positioning of the PV panel.
Properties
PM C and PM F clamps in AW 6060 T66 aluminium alloy in accordance with EN 755-2:2013.
A2.70 stainless steel Allen screw in accordance with EN ISO 3506-1 /2:2009.
FCN AL Hammer head nut in AW 6060 T66 aluminium alloy in accordance with EN 755-2:2013 and grey nylon PA6.
Applicazioni e Certificazioni
Applications
Suitable for:
Pitched roof systems with hooks
Flat roof systems with triangular frames
Trapezoidal metal sheet roof systems
Corrugated sheet roof systems
Special structures systems
With:
SolarFish H33
SolarFish H44
SolarMetal
Istruzioni di montaggio
Functionality
Insert the lower part of the PM pre-assembled clamps into the upper groove of the rail.
Turn the PM pre-assembled clamps 90° clockwise.
Lock the PV module by applying a tightening torque of about 10 Nm to the Allen screw (TCEI).
