Art.-Nr. 564155

GTIN (EAN-Code): 4048962459364

fischer TermoZ CS II 8/115 DT 110 V

Name: fischer TermoZ CS II 8/115 DT 110 V
Brand: fischer

Variante de produs

Download of image data

Top Features

Reduction of thermal bridges due to the compound screw.
No anchor marks.
Approved for hammer-drilled holes in vertically perforated bricks.
Minimal insertion torque.
No ejected dirt due to closed plate.

The strong countersunk screw fixing for soft insulating boards.

Advantages

Pre-assembled fixing with a 110 mm plate for countersunk mounting.
The compound screw minimises thermal bridges, thus there are no anchor marks on the façade.
The combination of the advantages of countersunk installation and additional plates achieves a homogeneous surface with higher pull-through values at the same time.
The very thin plate edge provides an optimal fit to the insulation board and the application of thin reinforcement layers.
Due to the special expansion zone of the anchor sleeve, the TermoZ CS II, is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
The special geometry of the underside of the plate reduces the necessary insertion torque for convenient and fast installation.

The TermoZ CS DT 110V, as a fully pre-assembled ETICS fastener with a plate diameter of 110mm for countersunk mounting, is perfectly suited for fastening insulation boards with low compressive strength. By combining the advantages of countersunk installation and additional plates, a homogeneous surface is achieved with higher pull-through values at the same time. The fastener is installed countersunk perfectly with the CS setting tool and a standard hammer drill or cordless screwdriver.

Applications

Countersunk installation of soft insulation materials such as mineral wool boards on concrete and masonry

Building materials

Building material classes A, B, C, D, E
Concrete
Building brick
Solid sand-lime brick
Lightweight concrete
Weather shell
Vertically perforated brick
Perforated sand-lime brick
Hollow blocks made from lightweight concrete
Lightweight aggregate concrete
Aerated concrete

Puteți găsi informații detaliate despre materialele de construcție în documentul de înregistrare

Aprobări

ETA-14/0372
DoP No. 0298
DoP No. 0346
EPD-FIW-20210314-CBD1-EN

Functionality

Fast countersunk installation with the TermoZ CS setting tool and a standard hammer drill or cordless screwdriver.
The fixing is pushed through the insulation into the drill hole and is screwed in.
The installation is completed when the plate is flush with the insulation board.
After countersunk installation, the anchor plate has to be covered with a round cap.

Countersunk installation of TermoZ CS II DT 110 V with setting tool CS

1 / 6

ETA Certification Document

pdf, ETA-14/0372

European Technical Assessment for fischer TermoZ CS II 8 and fischer TermoZ CS II 8 DT 110 V

Creat pe 11/03/2023

DOP - Declaration of Performance

pdf, DoP No. 0346

Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic anchors for use in concrete)

Creat pe 11/17/2023

DOP - Declaration of Performance

pdf, DoP No. 0298

Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic fastener for fixing of external thermal insulation composite systems with rendering)

Creat pe 05/16/2022

ETA-approval
Drill diameter ( d₀ )	8 mm
Effect. anchorage depth ( h_ef )	25 mm
Max. usable length at countersunk installation ( t_fix )	90 mm
Min. total drill whole depth incl. insulation at countersunk installation ( h )	145 mm
Drive	TX30
Amount	100 pcs
GTIN (EAN-Code)	4048962459364

fischer TermoZ CS II 8/115 DT 110 V

Avantajele / Descrierea produsului

Aplicație și aprobare

Instrucțiuni de asamblare

Date tehnice

Documente pentru descărcare