The powerful universal mortar for concrete and masonry.

Injection mortar FIS V Plus

The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures.

Product Variant

Download of image data

Product Variant

Goedkeuringen / Testrapporten

60 Product varianten

Language on label

Scale unit

Contents

Amount

GTIN (EAN-Code)

Legenda = Goedkeuring beschikbaar— = Goedkeuring niet beschikbaar

Meer resultaten

54 van 60 artikelen bekeken

Advantages

The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications.
The ETA assessment for a service life of 100 years offers permanent safety for all applications.
The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions.
FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures.
The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths.
The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications.

Applications

Steelwork constructions
Timber constructions
Guard rails
Façades
Staircases
Steel brackets
Machines
Masts
Awnings
Canopies
Gates
Consoles
Pipelines
Gratings
Satellite antennas

Building materials

Approved for anchorings in:

Concrete C12/15 to C50/60, cracked and non-cracked
Hollow blocks made from lightweight concrete
Hollow blocks made from concrete
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Aerated concrete
Solid brick

Approved for anchorings with:

Rebar connections
Remedial wall tie VBS 8
Weather facing reconstruction system FWS II
Stand-off installation TherMax

You can find detailed information on building materials in the approval document.

Approval

ETA-20/0603
ETA-20/0729
ETA-20/0728
DoP No. 0231
DoP No. 0381
DoP No. 0331
ESR-2786
20046/15515
22044-enshort
18050 /15511 /CT /FA
EPD-Kiwa-EE-000431-EN

Functionality

FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
The mortar is extruded bubble free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
The injection cartridges are quick and easy to use with the fischer dispensers.
Partially used cartridges can be reused by changing the static mixer.

Installation in concrete with FIS V Plus and FIS A / RG M

1 / 9

Installation in concrete with FIS V Plus and RG M I

1 / 9

Installation in solid brick with FIS V Plus and FIS A

1 / 7

Installation in hollow blocks with FIS V Plus and FIS HK + FIS A

1 / 5

Installation in aerated concrete with FIS V Plus and FIS A / RG M

1 / 7

Installation in undercut drill hole in aerated concrete with FIS V Plus and FIS A / RG M

1 / 6

ETA Certification Document

pdf, ETA-20/0603

European Technical Assessment for Injection System fischer FIS V Plus - Bonded anchor for use in concrete

Created on 11/13/2020

DOP - Declaration of Performance

pdf, DoP No. 0231

Declaration of Performance for fischer injection system FIS V Plus (Bonded fastener for use in concrete)

Created on 11/27/2020

ETA Certification Document

pdf, ETA-20/0729

European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry

Created on 02/03/2025

DOP - Declaration of Performance

pdf, DoP No. 0381

Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)

Created on 02/17/2025

ETA Certification Document

pdf, ETA-20/0728

European Technical Assessment for Rebar connection with fischer injection system FIS V Plus - Systems for post-installed rebar connections with mortar

Created on 12/16/2022

DOP - Declaration of Performance

pdf, DoP No. 0331

Declaration of Performance for fischer injection system FIS V Plus (Mortar for post-installed rebar connections)

Created on 01/02/2023

Injection mortar FIS V Plus

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading

DIBt-approval
ETA-approval
Language on label	EN, ES, PT
Scale unit	180
Contents	1 x Cartridge 360 ml 2 x Static mixer FIS MR Plus
Amount	1 pcs
GTIN (EAN-Code)	4048962417432

DIBt-approval
ETA-approval
Language on label	AR, EN, ZH
Scale unit	180
Contents	1 x Cartridge 360 ml 2 x Static mixer FIS MR Plus
Amount	1 pcs
GTIN (EAN-Code)	4048962417449

DIBt-approval
ETA-approval
Language on label	AR, EN, ZH
Scale unit	180
Contents	20 x Cartridge 360 ml 40 x Static mixer FIS MR Plus
Amount	20 pcs
GTIN (EAN-Code)	4048962417456

DIBt-approval
ETA-approval
Language on label	EN, ES, PT
Scale unit	180
Contents	1 x Cartridge 360 ml 2 x Static mixer FIS MR Plus
Amount	1 pcs
GTIN (EAN-Code)	4048962417470