FIS P Plus 300 T DIY - fischer international

Product Description

Advantages

With FIS P Plus, anchorings in masonry and non-cracked concrete for which approval is relevant can be realised in a particularly economical manner.
FIS P Plus 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. As a result, procurement costs can be reduced on the basis of polyester resin.

Application and Permission

Applications

Building materials

Approved for anchorings in:

Also suitable for:

* You can find detailed information on building materials in the registration document.

Permission

For Details see corresponding Documents

Assembly Instruction

Functionality

FIS P Plus is a 2-component injection mortar based on polyester resin.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
The mortar is extruded bubble free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
Partially used cartridges can be reused by changing the static mixer.

Technical Data

Legend = Permission Available

Load Table

Documents for Downloading

Additional Documents

Approvals

Title	Type	Created	Valid Till
ETA - European Technical Assessment (PDF, 4 MB)	ETA-18/0383	9/6/2018
DOP - Declaration of Performance (PDF, 3 MB)	DoP No. 0128	9/14/2018
EPD - Environmental Product Declaration (PDF, 1 MB)	EPD-FIS-20130268-IBG1-DE	12/1/2014	11/30/2019

fischer Injection mortar FIS P Plus 300 T