Product group image
Application picture
Application picture
1   1

Injection mortar FIS P Plus

The approved injection mortar for anchorings in masonry and non-cracked concrete

The fischer injection mortar FIS P Plus is a polyester hybrid mortar with approval specifically for fixings in masonry and non-cracked concrete with a variety of masonry blocks. It is suitable for fixing fire escapes, handrails or canopies. The FIS P Plus is processed with the approved system components fischer threaded rod FIS A, fischer internal threaded rod FIS E together with the fischer injection anchor sleeves indoors and outside. It is possible to reuse cartridges already opened by simply changing static mixer. This saves time and money during installation.

Product Description

  • With FIS P Plus, anchorings in masonry and non-cracked concrete for which approval is relevant can be realised in a particularly economical manner.
  • FIS P Plus 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. As a result, procurement costs can be reduced on the basis of polyester resin.

Available Product Variants

Application and Permission

  • Awnings
  • Canopies
  • Fireplaces
  • French balconies
  • Fire escapes
  • Gratings
  • Gates
  • Handrails
Building materials
Approved for anchorings in:
  • Concrete C20/25 to C50/60, non-cracked
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Perforated blocks made from lightweight concrete
  • Solid brick
  • Aerated concrete
Also suitable for:
  • Solid brick made from lightweight concrete
* You can find detailed information on building materials in the registration document.


  • ETA-11/0419, ETAG 029
  • ETA-18/0383, EAD 330499-00-0601
  • DoP No. 0025
  • DoP No. 0119
  • DoP No. 0128
  • DoP No. 0756-CPD-0424
  • EPD-FIS-20130268-IBG1-DE
For Details see corresponding Documents

Assembly Instruction

  • FIS P Plus is a 2-component injection mortar based on polyester resin.
  • Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
  • The mortar is extruded bubble free from the drill hole base.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
  • Partially used cartridges can be reused by changing the static mixer.

Documents for Downloading


Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 3 MB) European Technical Assessment for fischer injection system FIS P Plus masonry ETA-11/0419, ETAG 029 10/30/2015
ETA - European Technical Assessment (PDF, 4 MB) ETA-18/0383, EAD 330499-00-0601 9/6/2018
DOP - Declaration of Performance (PDF, 11 MB) DoP No. 0025 11/6/2015
DOP - Declaration of Performance (PDF, 10 MB) DoP No. 0119 12/21/2017
DOP - Declaration of Performance (PDF, 3 MB) DoP No. 0128 9/14/2018
DOP - Declaration of Performance (PDF, 1 MB) DoP No. 0756-CPD-0424 6/25/2013
EPD - Environmental Product Declaration (PDF, 1 MB) EPD-FIS-20130268-IBG1-DE 12/1/2014 11/30/2019

System Components & Related Categories