The high-performance concrete screw for absolute installation ease in external applications.

Concrete screw UltraCut FBS II 6 SK R

The fischer concrete screw UltraCut FBS II 6 R with the specially hardened red tip is a high-performance anchoring solution for quick installation. The concrete screw is ideal for outdoor applications or in damp areas. The European Technical Assessment for cracked and non-cracked concrete as well as for seismic loads and the fire suitability for fire resistance class R 120 guarantee additional safety. The saw-tooth geometry enables quick and energy-saving installation. The expansion-free anchorage (undercut) ensures low edge and axial spacings.

Product Variant

Download of image data

Product Variant

Approvals / Test reports

3 product variants

Drill diameter

Screw dimension

Screw length

Usable length

Drive

Head-ø

Legend = Permission Available— = Permission not Available

Viewed 3 of 3 variant (s)

Advantages

The specially hardened red tip provides a faster and more secure installation.
The stainless steel concrete screw guarantees a high level of corrosion resistance especially for wet rooms and external applications.
Thanks to the special saw-tooth geometry, the thread flanks cut deep into the concrete and enable higher tensile and shear forces.
Both the ETA assessment Option 1 and Part 6 regulate the use in cracked and non-cracked concrete for the highest safety requirements.
The FBS II 6 R is approved for multiple use of non-load-bearing systems and guarantees the highest safety standards during installation.
The approved product for seismic performance category C1 allows use in earthquake zones and increases the flexibility of the fields of application.
The approved adjustment for the concrete screws allows the screw to be unscrewed twice for a total of 20 mm, to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
The underhead fluting prevents unintentional loosening of the concrete screw and ensures greater grip during installation and secure fastening.
The expansion-free anchorage (undercut) ensures low edge and axial spacings.

Functionality

The UltraCut FBS II 6 R is suitable for pre-positioned and push-through installation.
A tangential impact wrench with a suitable socket is recommended for installation.
No hole cleaning is required for installation in ceilings and floors or when using hollow drills. When drilling holes in the floor, drill 3 times the drill diameter deeper.
Correct installation of the screw is ensured when the screw head is in contact with the mounting part so that the screw can no longer be screwed in any further (visual setting check).

Installation UltraCut FBS II 6 R in concrete

1 / 4

Fixture adjustment

1 / 3

ETA Certification Document

pdf, ETA-24/0973

European Technical Assessment for fischer concrete screw UltraCut FBS II R - Mechanical fasteners for use in cracked and uncracked concrete

Created on 01/08/2025

DOP - Declaration of Performance

pdf, DoP No. 0371

Declaration of Performance for fischer concrete screw ULTRACUT FBS II R (Mechanical fastener for use in concrete)

Created on 01/22/2025

ETA Certification Document

pdf, ETA-17/0740

European Technical Assessment for fischer concrete screw UltraCut FBS II R - Mechanical fasteners for use in cracked and uncracked concrete

Created on 01/08/2025

ETA-approval
Drill diameter ( d₀ )	6 mm
Screw dimension ( d_s x l_s )	6.0x50 mm
Screw length ( l_s )	50 mm
Usable length ( t_fix,min - t_fix,max )	Screw length - h_nom mm
Drive	TX30
Head-ø ( d_h )	13,25 mm
Seismic-Approval	—
Fire resistance	—
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4048962527681

ETA-approval
Drill diameter ( d₀ )	6 mm
Screw dimension ( d_s x l_s )	6.0x65 mm
Screw length ( l_s )	65 mm
Usable length ( t_fix,min - t_fix,max )	Screw length - h_nom mm
Drive	TX30
Head-ø ( d_h )	13,25 mm
Seismic-Approval	C1
Fire resistance	R120
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4048962527698

ETA-approval
Drill diameter ( d₀ )	6 mm
Screw dimension ( d_s x l_s )	6.0x85 mm
Screw length ( l_s )	85 mm
Usable length ( t_fix,min - t_fix,max )	Screw length - h_nom mm
Drive	TX30
Head-ø ( d_h )	13,25 mm
Seismic-Approval	C1
Fire resistance	R120
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4048962527704

Concrete screw UltraCut FBS II 6 SK R

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading