fischer bolt anchor FWA 10 x 80 R2, stainless steel R2

Name: fischer bolt anchor FWA 10 x 80 R2, stainless steel R2
Brand: fischer

Product Variant

Download of image data

Top Features

Economical solution for all applications where an approved fixation is not required.
The FWA R2 achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
If the reduced anchorage depth is used, this lowers the drill hole depth and simplifies installation.
The stainless steel A2 is also suitable for indoor applications with condensed conditions.

The cost-effective fixation without approval – for use in non-cracked concrete.

Advantages

The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimizes the amount of time needed for installation whilst increasing flexibility.
Indoor applications with condensed conditions are also suitable for the FWA R2.

The fischer bolt anchor FWA R2 is an economical solution for all applications where an approved fixation is not required. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Functionality

The FWA R2 is suitable for pre-positioned and push-through installation.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Installation bolt anchor FWA R2

1 / 5

Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	73 mm
Anchor length ( l )	80 mm
Max. usable length hef,stand./hef,min. ( t_fix )	5 / 15 mm
Width across nut	17 mm
Amount	50 pcs
GTIN (EAN-Code)	4048962567083

fischer bolt anchor FWA 10 x 80 R2, stainless steel R2

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading