fischer bolt anchor FBN II 16/15 K R stainless steel

Name: fischer bolt anchor FBN II 16/15 K R stainless steel
Brand: fischer

Product Variant

CAD Data

Download of image data

Top Features

The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
Simple assembly due to few taps and minimal slippage.
Stainless steel: permanent safety in outdoor use.

Art.-Nr. 549951
Quattric II 16/160/215 S
Art.-Nr. 531827
SDS Plus II 16/160/210
Art.-Nr. 558792
FA-ST II M16

Short and strong: the cost-efficient fixing made of stainless steel for use in non-cracked concrete.

Advantages

The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

The fischer bolt anchor FBN II K is a steel anchor for cost-effective fixings in non-cracked concrete. The short version is suitable for pre-positioned installation and push-through installation. The stainless steel version of the bolt anchor is recommended for fixing façade sub-structures, consoles, and ladders in external areas.

Functionality

The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Installation FBN II

1 / 5

ETA-approval
Drill diameter( d₀ )	16 mm
Min. drill hole depth for through fixings( h₂ )	104 mm
Anchor length( l )	118 mm
Max. usable length h_ef,stand./h_ef,min.( t_fix )	- / 15 mm
Thread( ø x length )	M16 x 64 mm
Width across nut	24 mm
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4048962095494

fischer bolt anchor FBN II 16/15 K R stainless steel

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading