fischer bolt anchor FBN II 10/10 K electro zinc plated

Name: fischer bolt anchor FBN II 10/10 K electro zinc plated
Brand: fischer

Produktvarianten

CAD Data

Download of image data

Top Features

The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
Simple assembly due to few taps and minimal slippage.

Art.-Nr. 549922
Quattric II 10/100/165 S
Art.-Nr. 531792
SDS Plus II 10/100/160
Art.-Nr. 077937
FABS
Art.-Nr. 558790
FA-ST II M10

Short and strong: the cost-efficient fixing made of galvanised steel for use in non-cracked concrete.

Advantages

The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

The fischer bolt anchor FBN II K is a steel anchor for cost-effective fixings in non-cracked concrete. The short version is suitable for pre-positioned installation and push-through installation. The bolt anchor is made of zinc-plated steel and is recommended for railings, handrails or consoles in indoor areas.

Functionality

The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Installation FBN II

1 / 5

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	68 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	- / 10 mm
Thread ( ø x length )	M10 x 36 mm
Width across nut	17 mm
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4006209409473

fischer bolt anchor FBN II 10/10 K electro zinc plated

Die Vorteile / Produktbeschreibung

Anwendung und Zulassung

Montageanleitung

Technische Daten

Dokumente zum Download