Art.-No. 40807
GTIN (EAN-Code): 4006209408070
fischer bolt anchor FBN II 8/10 K electro zinc plated
Top Features
- The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
- If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
- Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
- Simple assembly due to few taps and minimal slippage.
Your advantages / Product description
Short and strong: the cost-efficient fixing made of galvanised steel for use in non-cracked concrete.
Advantages
- The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
- The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
- The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
- Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
- The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
The fischer bolt anchor FBN II K is a steel anchor for cost-effective fixings in non-cracked concrete. The short version is suitable for pre-positioned installation and push-through installation. The bolt anchor is made of zinc-plated steel and is recommended for railings, handrails or consoles in indoor areas.
Application and approval
Applications
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Machines
- Gates
- Façades
Building materials
Approved for:- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Approval
- ETA-07/0211
- DoP No. 0192
Assembly instruction
Functionality
- The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
- Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
- When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
- The head embossing offers a simple control of the anchoring.
- In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Installation FBN II
1 / 5
- 1
- 2
- 3
- 4
- 5
Technical Data
| ETA-approval | |
| Drill diameter ( d0 ) | 8 mm |
| Min. drill hole depth for through fixings ( h2 ) | 56 mm |
| Anchor length ( l ) | 60 mm |
| Max. usable length hef,stand./hef,min. ( tfix ) | - / 10 mm |
| Thread ( ø x length ) | M8 x 29 mm |
| Width across nut | 13 mm |
| Packaging | Folding box |
| Amount | 50 pcs |
| GTIN (EAN-Code) | 4006209408070 |
Documents for Downloading
- ETAs and DoPs
- Technical documents
- Sales materials
ETA Certification Document
pdf, ETA-07/0211
European Technical Assessment for fischer Bolt Anchor FBN II, FBN II R - Mechanical fastener for use in concrete
Created on 07/13/2020
DOP - Declaration of Performance
pdf, DoP No. 0192
Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)
Created on 07/27/2020