Pre-assembled triangular frame for the installation of PV panels in a lowered position on flat roofs. Suitable for landscape layout installation.

Pre-assembled triangular frame STFS

STFS is the compact triangular frame for installing photovoltaic systems in a lowered position on flat roofs with panels arranged with a landscape layout. Particularly suitable for minimizing the visual impact of the system and the action of the wind in the case of roofs with perimeter masonry of limited height.

Varianty výrobku

Download of image data

Varianty výrobku

1 variant výrobku

Rail cross section

Moment of inertia

Section modulus

Hole-ø

Width across nut

Installation torque

Zobrazeno 1 z 1 variant

Advantages

The STFS triangular frame is pre-assembled and all the accessories for the connection to the Solar rails are included in the package.
Adjustable angle 10°-13°.
The lowered design allows an only 30 cm high installation (suitable for a reduced visual impact and wind protection).

Properties

Triangular structure in AW 6063 T66 or AW 6060 T66 aluminium in accordance with EN 755-2:2013.
A2-70 stainless steel bolts in accordance with EN ISO 3506-1/2:2009.
Please note: any oxidation stains are considered characteristic of aluminium. This in no way impairs the functionality of the product and is not covered by the warranty.

Functionality

Determine the centre distance of the triangular frames according to the snow and wind loads in the installation area (use the SOLARPANEL-FiX software).
Identify the position of the triangular frames according to the load-bearing structure and layout of the system.
Select the desired angle of the triangle and fasten the diagonal strut in the corresponding position.
Fasten the base of the triangular frame with the appropriate anchor depending on the building material of the roof.
Connect the Solar rail to the triangular frame using the screws supplied in the package.

Installation flat roof triangle STFS

1 / 5

1
2
3
4
5

Rail cross section	3,04 cm²
Moment of inertia ( l_y )	7,23 cm⁴
Section modulus ( W_y )	1,97 cm³
Hole-ø ( D )	8,5 mm
Width across nut	13 mm
Installation torque ( T_inst )	10 Nm
Contents	5 x STFS triangle 20 x RHS M8 x 20 A2 hammer head screw 20 x MU F M8 A2 flanged nut
Amount	5 pcs
GTIN (EAN-Code)	8001132022450

Pre-assembled triangular frame STFS

Varianty výrobku

Výhody / popis

Použití a certifikáty

Návod k montáži

Dokumenty ke stažení