Pre-assembled triangular frame for the installation of PV panels on flat roofs. Suitable for portrait or landscape layout installation.
Pre-assembled triangular frame STFN
STFN is the triangular frame for the installation of photovoltaic systems on flat roofs, suitable for panels with both portrait and landscape layout. Available in four versions that can be selected based on the inclination and size of the PV panel.
5 x STFN 200 triangle 20 x RHS M8 x 20 A2 hammer head screw 20 x MU F M8 A2 flanged nut
Rail cross section
3,78 cm²
Moment of inertia
—
Hole-ø (
D
)
10,5 mm
Width across nut
13 mm
Installation torque (
Tinst
)
10 Nm
Contents
5 x STFN 200 triangle 20 x RHS M8 x 20 A2 hammer head screw 20 x MU F M8 A2 flanged nut
Amount
5 pcs
GTIN (EAN-Code)
8001132102121
Prezerané 4 z 4 variantov
Výhody / popis produktu
Advantages
The STFN triangular frame is pre-assembled and all the accessories for the connection to the Solar rails are included in the package.
Adjustable angle 10°-15° or 25°-30°-35°.
Suitable both for portrait or landscape PV panels orientation.
Two versions available: traditional and for long PV panels up to 2150 mm.
Properties
Triangular structure in AW 6063 T66, AW 6060 T5, AW 6060 T6 or AW 6060 T66 aluminium in accordance with EN 755-2:2013.
A2-70 stainless steel bolts in accordance with EN ISO 3506-1/2:2009.
Please note: any oxidation stains are considered characteristic of aluminium. This in no way impairs the functionality of the product and is not covered by the warranty.
Žiadosť a schválenie
Applications
Portrait or landscape oriented PV panels installation on flat roofs. PV panels inclination of 10°-15° or 25°-30°-35°.
Schválenia
TUV - R 60154136
Montážny návod
Functionality
Select the correct triangular frame according to the desired PV panels lenght and angle range.
Determine the centre distance of the triangular frames according to the snow and wind loads in the installation area (use the SOLARPANEL-FiX software).
Identify the position of the triangular frames according to the load-bearing structure and layout of the system.
Select the desired angle of the triangle and fasten the diagonal strut in the corresponding position.
Fasten the base of the triangular frame with the appropriate anchor depending on the building material of the roof.
Connect the Solar rail to the triangular frame using the screws supplied in the package.
