fischer rail SolarMetal P H25 400 mm AL Aluminium

Name: fischer rail SolarMetal P H25 400 mm AL Aluminium
Brand: fischer

Product Variant

Download of image data

Top Features

For installing PV panels with portrait layout on trapezoidal metal sheets
Ideal for optimizing the structure in installations with larger layouts
Made of AW 6060 T6 aluminium

ALG 5.2 x 20 mm
Screw 6.0 x 25 mm A2 EPDM
CG INT
PM C U 30 - 50 AL
PM C U 30 - 50 AL black
PM U 30 - 50 AL
PM U 30 - 50 AL black
PM C 28 - 34 AL
PM C 28 - 34 AL black

Rail for photovoltaic systems on trapezoidal metal sheet roofs.

Advantages

Flat and wide base to stabilise the support on the panel.
Available in rib or in pieces to optimise the structure on any type of layout.

fischer SolarMetal P is an aluminium alloy rail designed to fix photovoltaic systems on flat or sloping roofs with trapezoidal metal sheets and with orthogonal fastening. Suitable for panels running along the long side parallel to the frets. By using ALG rivets, the installtion is fast and easy. Furthermore the photovoltaic module can be installed quickly with clamps and easy cross joints through the top groove using the FNC AL hammer head nut, the MW bracket and the SKS M 8 hexagonal head screw.

Properties

AW 6060 T6 aluminium alloy in accordance with EN 755-2:2013.

Functionality

Choose the most suitable installation between the entire SolarMetal P rails and SolarMetal P rail pieces.
Determine the centre distance of the fixings according to the pitch of the trapezoidal metal sheet ribs and the snow and wind loads of the system installation area.
Place a layer of CG INT butyl adhesive tape between the SolarMetal P rail and the trapezoidal metal sheet. Ensure that the butyl adhesive tape is turned so that the aluminium layer covering is on the side where the rail rests.
In the case of fixing with ALG rivets, position the rail on the trapezoidal metal sheet and drill the rail and sheet together with a 5.5 mm diameter bit.
When fixing with 6x25 EPDM SolarScrew self-drilling screws, only pre-drill the SolarMetal P rail in the position where the fixing will be performed. Position the already pre-drilled rail on the sheet metal and screw in the self-drilling screw by passing it through the pre-drilled hole in the rail.

Installation rail SolarMetal P H25 AL with rivets

1 / 5

Installation rail SolarMetal P H25 AL with screws

1 / 5

Length ( L )	400 mm
Height ( H )	25 mm
Rail cross section	2,68 cm²
Moment of inertia ( l_y )	2,19 cm⁴
Moment of inertia ( l_z )	11,9 cm⁴
Section modulus ( W_z )	2,88 cm³
Section modulus ( W_y )	1,22 cm³
Weight	0,724 kg/m
Amount	50 pcs
GTIN (EAN-Code)	8001132021972

fischer rail SolarMetal P H25 400 mm AL Aluminium

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading