Art.-No. 578245
GTIN (EAN-Code): 4048962567908
fischer rail SolarFish H65 4,85 m AL aluminium
Top Features
- Cost optimized version with high cross-section for maximum versatility for optimizing the construction at installation situations with few support points and/or high loads.
- Compatible with both PMU/PMCU universal clamps and PM-F/PM-C pre-assembled clamps as well as the non-assembled clamps MF/MC.
- Flexible connection of the fastener by using the two lateral grooves or the lower groove of the rail.
- AW 6063 T66 aluminium.
Your advantages / Product description
The SolarFish H65 rail for cost-optimised handling of high loads and large support distances.
Advantages
- The 65 mm high cross-section makes SolarFish H65 the ideal solution for a cost optimized substructure for photovoltaic systems with high loads or large support distances.
- Compatible with both PMU/PMCU universal clamps and PM-F/PM-C pre-assembled clamps as well as the non-assembled clamps MF and MC.
- The 4,85m length allows to e.g. to optimize the structure for 4 PV-modules in portrait orientation and therefore reduces waste.
- The SolarFish H65 rail can be used very flexible with its two side grooves and one lower groove compatible with the quick couplings of the RH hooks or GT hooks or with SKS M8 screws or RHS hammer head screws.
fischer SolarFish H65 is an aluminium alloy rail that can be used on both flat and pitched roofs for photovoltaic systems. In addition to its versatility, the rail allows for quick and easy installation. In the lower and side grooves, SKS M 8 screws or RHS hammer head screws can be applied. In the upper groove, hammer head nuts FCN AL and MW brackets can be used for cross joints. The rail has been designed with a length that reduces waste. The rail is compatible with both the universal clamps PMU / PMCU as well as with the pre-assembled standard module clamps PMF/PMC and the non-assembled clamps MF/MC. SolarFish H65 can be applied on pitched roofs with the RH hooks as well as the GT hooks. For non-removable corrugated sheets oder tiles, the double-threaded screws STSI and STSR can be used. For rounded or seamed metal sheets, the DLA and DLAK hooks can be used. On flat roof systems, it is suitable for installations with the triangular frames STFS 10°-13°, STFN 10°-15° and STFN 25°-30°-35°.
Properties
- Aluminium alloy AW 6063 T66 in accordance with EN 755-2:2013.
Application and approval
Applications
- Aluminium rail for PV panels mounting systems suitable for the whole clamps range, in combination with tiles hooks, double-threaded screws, triangles and standing seam clamps.
Assembly instruction
Functionality
- Identify the correct support system based on the type of roof (e.g. flat tile hooks, barrel tile hooks, triangular frames for flat roofs, standing seam clamps, triangular frames for flat roofs, etc.)
- Assemble the SolarFish H65 rail on the selected support through the lower groove or side grooves.
- To connect two SolarFish H65 rails, install two CPN AL joints, making them slide inside the side grooves until it touches the stud in the centre of the joint. Complete the connection by fixing the two CPN AL connectors with 2 x 3.5 mm x 9.5 mm self-drilling screws on both sides of the SolarFish H65 rail.
- To limit thermal expansion, it is advisable to create series of rails connected to each other up to a maximum length of 15 m. Beyond this measure it is necessary to interrupt the structure and start again with a new rail disconnected from the previous ones.
- Install the clamps through the upper groove of the rail.
- Fix the PV panels by tightening the clamps.
1 / 4
- 1
- 2
- 3
- 4
Technical Data
| Length ( L ) | 4.850 mm |
| Height ( H ) | 65 mm |
| Preassembled EPDM | No |
| Rail cross section | 4,23 cm² |
| Moment of inertia ( ly ) | 20,41 cm4 |
| Moment of inertia ( lz ) | 8,96 cm4 |
| Section modulus ( Wz ) | 4,65 cm³ |
| Section modulus ( Wy ) | 6,1 cm³ |
| Weight | 1,14 kg/m |
| Amount | 1 pcs |
| GTIN (EAN-Code) | 4048962567908 |