fischer rail SolarFish H44 4.45 m AL, Aluminium

Name: fischer rail SolarFish H44 4.45 m AL, Aluminium
Brand: fischer

Produktvarianter

Download of image data

Top Features

High cross-section for maximum versatility
Compatible with both PMU/PMCU universal clamps and PM-F/PM-C pre-assembled clamps
AW 6063 T6 aluminium

Varenr. 572445
Rail connector SolarFish H44 AL
Varenr. 574235
PXC Plus AL
Varenr. 538880
PM C U 30 - 50 AL
Varenr. 538881
PM C U 30 - 50 AL black
Varenr. 519784
PM U 30 - 50 AL
Varenr. 534352
PM U 30 - 50 AL black
Varenr. 511093
PM C 28 - 34 AL

Universal aluminium profile for photovoltaic systems on pitched and flat roofs.

Advantages

The 44 mm high cross-section makes SolarFish H44 the ideal solution for building most structures for photovoltaic systems.
Compatible with both PMU/PMCU universal clamps and PM-F/PM-C pre-assembled clamps.
The different lengths allow to optimize the structure according to the size of the PV panels used and therefore reduces waste.
The SolarFish H44 rail can be used very flexible with its two side grooves and one lower groove compatible with the quick couplings of the RH hooks or GTA hooks or with SKS M8 screws or RHS hammer head screws.

fischer SolarFish H44 is an aluminium alloy rail that can be used on both flat and pitched roofs for photovoltaic systems. In addition to its versatility, the rail allows for quick and easy installation. In the lower and side grooves, SKS M 8 screws or RHS hammer head screws can be applied. In the upper groove, hammer head nuts FCN AL and MW brackets can be used for cross joints.The rail has been designed with a length that reduces waste and facilitates handling on site. SolarFish can be applied on pitched roofs with the RH hooks as well as GTA 1, GTA 2, GTA 3, GC, GTP, GTPR, GT 130 and GTX 150. On flat roof systems, it is suitable for installations with the triangular frames STFS 10°-13°, STFS 10°-15° and STFS 25°-30°-35°.

Properties

Aluminium alloy AW 6063 T6 in accordance with EN 755-2:2013.

Functionality

Identify the correct support system based on the type of roof (e.g. flat tile hooks, barrel tile hooks, triangular frames for flat roofs, standing seam clamps, triangular frames for flat roofs, etc.)
Assemble the SolarFish H44 rail on the selected support through the lower groove or side grooves.
To connect two SolarFish H44 rails, you have two different options.
Either use the SolarFish H44 connector. Use the scratch and the dovetail joint to easily position the rails inside the connector. Fix the connector to the rails through 4 RHS 8 screws and 4 hexagonal flanged MU F 8M nuts by tightening them with a 15 Nm torque.
Alternatively, install two CPN AL joints on both sides of the rail, making them slide inside the side grooves until it touches the stud in the centre of the joint. Complete the connection by locking each end of the CPN AL connection with 4 x 3.5 mm x 9.5 mm self-drilling screws on each side of the SolarFish H44 rail.
To limit thermal expansion, it is advisable to create series of rails connected to each other up to a maximum length of 15 m. Beyond this measure it is necessary to interrupt the structure and start again with a new rail disconnected from the previous ones.
Install the clamps through the upper groove of the rail.
Fix the PV panels by tightening the clamps.
Apply the AK SP caps to the ends of the SolarFish H44 rail for a clean finish.

Length ( L )	4.450 mm
Rail cross section	3,42 cm²
Moment of inertia ( l_y )	7,27 cm⁴
Moment of inertia ( l_z )	6,45 cm⁴
Section modulus ( W_z )	3,37 cm³
Section modulus ( W_y )	3,26 cm³
Weight	0,9222 kg/m
Amount	1 pcs
GTIN (EAN-Code)	8001132102022

fischer rail SolarFish H44 4.45 m AL, Aluminium

Fordelene / Produktbeskrivelse

Søknad og godkjenning

Monteringsanvisning

Tekniske data

Dokumenter for nedlasting