Remedial wall tie mechanical VBS-M

The quick façade repair for two-leaf cavity walls

The fischer remedial wall tie VBS-M is suitable for the renovation of two-shell masonry. Above all, it is used for the subsequent application of heat insulation or to secure a suspended, rear-ventilated façade. Thanks to the two expansion zones of the plug, the cost-effective solution enables the safe connection of the facing masonry and outer shell. The low anchorage depth of just 50 mm also enables fast and cost-effective installation in stone and in bed joints. The slim plug edge and head enable a flush installation or a deeper installation with no annoying projection. The drill hole can be retrospectively grouted so that it is no longer visible.

Product Description

Advantages

The approved fixing in stone and in joints from at least 50 mm facing masonry provides a high degree of flexibility and security.
Use in joints and with a low anchorage depth of just 50 mm allows for a quick and economical installation.
The small anchor rim and screw head allow for a surface-flush or deep-set installation.
The drill hole can be retrospectively sealed so that it is no longer visible in the façade.
A drip coil prevents condensate running into the load-bearing layer, thus preventing frost and corrosive damage.

Available Product Variants

Application and Permission

Applications

VBS-M is especially suitable for applications where external thermal insulation composite systems (ETICS) have been previously installed.
Retrorespective repair of facing masonry.

Building materials

Facing masonry with and without an air layer

* You can find detailed information on building materials in the registration document.

Permission

DoP No. 0618-CPF-0002
No. VBS-M - EN - 0001
Z-21.2-1956

For Details see corresponding Documents

Assembly Instruction

Functioning

The remedial wall tie VBS-M is set in the load-bearing layer and into facing masonry using push-through installation.
In accordance with the approval, no drill hole cleaning is required.
The two expansion zones in the load-bearing layer and in the facing masonry ensure a secure fixation.
The plug doesn't fix into the facing masonry until the head grips into the load-bearing layer. This ensures the very best installation safety.

Documents for Downloading

Approvals

Title	Type	Created	Valid Till
DOP - Declaration of Performance (PDF, 451 KB)	DoP No. 0618-CPF-0002	9/17/2013
DOP - Declaration of Performance (PDF, 1 MB)	No. VBS-M - EN - 0001	2/10/2016
DIBt, National German Approval (PDF, 1012 KB)	Z-21.2-1956	10/12/2016	4/14/2020

System Components & Related Categories

System Components

Accessories

Accessories

Compressed air gun for the optimal cleaning of the drill hole for renovation work with the VBS 8

More Information

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information