Approvals and template for setting documentation included.
Maximum flexibility: Versions with injection mortars FIS EM and FIS V are possible.
Anchoring corresponding to cast-in reinforcement bars in line with Eurocode 2 and DIN 1045-1.
ETA approval for post-production rebar connections.
Your advantages / Product description
Rebar connections professionally executed.
The FIS rebar case contains all of the individual components required for the creation of rebar connections, thus ensuring an easy installation.
The components are used with the injection mortars FIS SB, FIS EM Plus, or FIS V depending on requirements.
With the injection mortars FIS V and FIS VS LOW SPEED, the rebar connections can be realised with a diameter of 8 to 28 mm, and with FIS EM a diameter of up to 40 mm can be achieved if required This offers maximum flexibility.
The injection mortar FIS SB allows the user to realise rebar connections with a diameter of 8 to 32 mm in conjunction with easy and therefore user-friendly drill hole cleaning.
FIS EM Plus also allows for the execution of rebar connections in diamond-drilled holes.
The fischer FIS rebar case contains the accessories, approvals, and documentation required for the creation of approval-compliant rebar connections. The box is lined with foam and contains eight cleaning brushes with a diameter of 12 - 55 mm, five extensions for cleaning brushes, an SDS socket with M8 internal thread, 24 injection adapters, a cleaning tube, a brush control cartridge, eight cleaning nozzles, a marking tape, a digital thermometer, safety goggles, installation instructions, 10 setting protocols, two flat spanners, and the corresponding approvals.
Application and approval
Post-installed rebar connections
You can find detailed information on building materials in the approval document.
Anchoring as with cast-in reinforcement bars in line with Eurocode 2 and DIN 1045-1.
The mortar is extruded bubble free into the drill hole using the injection adapter. The geometry causes a build-up of pressure in the drill hole, which pushes the injection adapter and extension tube automatically out of the drill hole.
The mortar bonds the entire surface of the reinforcement bar with the drill hole wall.
A special certification is necessary for installation according to approval in Germany. The fischer Academy offers the relevant training courses.
Installation in concrete with FIS EM Plus in hammer drilled holes
1 / 6
Installation in concrete with FIS EM Plus in diamond drilled holes
1 / 7
1 / 5
8 x Cleaning brush BSB, 5 x Extensions for cleaning brushes à 40 cm, 1 x SDS Chuck with internal thread M 8, 24 x Injection adapter, 1 x Cleaning hose complete, 1 x Brush control template, 8 x Cleaning nozzle, 1 x Marker tape, 1 x Digital thermometer, 1 x Protective goggles, 1 x Installation instructions (german), 10 x Installation report, 2 x Flat spanner SW 7 and the relevant approvals
European Technical Assessment for fischer injection system FIS EM Plus - Post-installed reinforcing bar (rebar) connections with improved bond-splitting behaviour under static loading and seismic action