Art.-No. 571947

fischer Filling mortar FastFill 300 T

Top Features

Fast curing mortar
For indoor and outdoor use
Easy processing without formwork
Partially used cartridges can be reused
Clean work result due to included static mixer

The pre-portioned cartridge solution to backfill anchor plates.

Advantages

The viscosity of the mortar allows backfilling without formwork for an easy application.
With the included static mixer, the mortar can be injected directly under the anchor plate and thus allows a precise dosage.
The cartridge package ensures clean working without direct contact with the mortar.
The fast curing time of the filling mortar allows rapid work progress.
The cartridge system can be used with standard injection dispensers, thus no special equipment is required.

The fischer filling mortar FastFill is the quick and easy solution to backfill small to medium-sized anchor plates. Thanks to the cartridge as a pre-portioned package unit, no mixing of components is necessary as with conventional backfilling mortar solutions in sacks or buckets. With the included static mixer, the mortar can be injected directly under the anchor plate that needs to be backfilled. Due to the viscosity of the mortar, a formwork is not required.

Functionality

FastFill is a 2-component mortar system based on polyester resin.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
Partially used cartridges can be reused by changing the static mixer.
The excess mortar can be smoothed out with a trowel after filling. For this purpose, take into account the specified curing times.

1 / 5

Contents	1 x cartridge 300 ml, 2 x static mixer FIS MR Plus
Amount	1 pcs.
GTIN (EAN-Code)	4048962517095

fischer Filling mortar FastFill 300 T

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading