fischer Carbon Fibre Fabric FRS-W U600x500

Top Features

Unidirectional, high-strength carbon fibre fabric for structural strengthening
600 gr/m² area density for ultimate strengthening in even one layer
Flexible strengthening even of curved concrete members like columns
Build up the required strength with multiple layers in different directions or combine with CFRP-laminates

Flexible carbon fibre fabric for versatile concrete strengthening.

Advantages

Area density 600 gr/m²
Suitable for the strengthening of convex concrete members
Strengthening without singificantly increasing the dead-load of existing structures
Different coil widths available for cost-efficient design and flexibility
High corrosion resistance
Suitable for the homogeneous strengthening of large area slabs

Unidirectional, high-strength carbon fibre fabric for structural strengthening with 600 gr/m² area density.

Applications

Structural Strengthening of reinforced concrete and pre-stressed concrete members
Enhancing the tensile reinforcement area of existing concrete members
Buildings, infrastructure and park decks
Beams, columns, concrete slabs, walls
Wall and ceiling openings

Building materials

Approved for:

Applicable for:

* Puede encontrar información detallada sobre materiales de construcción en el documento de registro.

Aprobación

Functionality

FRS-W U 600 unidirectional carbon fibre fabrics are used for the strengthening of concrete members in combination with the ambient temperature curing saturating resin FRS-CF
The fabric is applied in either dry or wet layup application technique and cured on site

Installation steps dry layup (recommended for FRS-W U300)

1 / 10

Installation steps wet layup (recommended for FRS-W U600)

1 / 12

Mean Elastic Modulus (compression)	230.000 N/mm²
Mean ultimate tensile strain	1,8 %
Density	1.55 g/cm³
Width ( B )	500 mm
Length ( l )	100 m
Nominal laminate cross section	510 mm²
Recommended consumption	1.0 - 1.2 kg/m²
Amount	1 pcs
GTIN (EAN-Code)	4048962530711