Insulation support DHM

The fire-protection-tested metal insulation support for fire-resistant insulating boards

The fischer insulation support DHM is a fire-tested metal insulation support for pressure-resistant insulation boards. The fire resistance rating F 120 guarantees a secure fixing of fire-resistant insulation. The DHM is hammered in the pre-positioned installation. The simple hammer installation allows fast setting, thereby reducing the amount of work. The spring steel expands in the building material and holds the insulation boards securely in concrete, aerated concrete, solid and hollow building materials. The DHM is hammered into aerated concrete without pre-drilling. This saves time.

Product Description

Advantages

The metal insulation support achieves fire resistance F 120. This means that it can be used where there are fire resistance requirements.
The DTM 80 plate for soft insulating materials (available separately) simplifies storage and minimises costs.
The simple hammerset installation allows for a quick installation process and thus reduces workload.
The shaft geometry allows setting in aerated concrete without pre-drilling, thus saving a stage of installation.
Stainless steel version DHM A2 (1.4301) for wet and extirior applications.

Available Product Variants

15 Product variant (s) found

Variant

DIBt-approval

Drill diameter

d₀

Anchor length

Min. drill hole depth

h₁

Legend = Permission Available — = Permission not Available

Viewed 15 of 15 variant (s)

Application and Permission

Applications

To fix fire-resistant soft or pressure-resistant insulating materials, such as:

Mineral / glass wool
Light building boards made of wood wool
Foam glass tiles

Also suitable for:

Polystyrene boards
Coir matting

Building materials

Concrete
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Natural stone with dense structure
Aerated concrete
Solid brick made from lightweight concrete
Solid brick

* You can find detailed information on building materials in the registration document.

Permission

Z-21.8-2057

For Details see corresponding Documents

Assembly Instruction

Functionality

The insulation support is set in push-through installation using a hammer.
When hammered in, the expansion part tightens like a spring with the substrate.
Use the DTM 80 plate (available separately) to fix soft insulating materials.

Documents for Downloading

Additional Documents

Load Table (PDF, 27 KB)

Approvals

Title	Type	Created	Valid Till
DIBt, National German Certification (PDF, 1008 KB) fischer insulation support DHM in concrete	Z-21.8-2057	12/4/2020	12/4/2025

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Masonry drill bit Pointer M

The perfect drill bit for all perforated building materials

More Information

DIBt-approval
Drill diameter d₀	8 [mm]
Anchor length l	80 [mm]
Min. drill hole depth h₁	50 [mm]
Max. fixture thickness t _fix	— [mm]
Packaging	Folding box
Amount	250 [pcs.]
GTIN (EAN-Code)	4048962246940

DIBt-approval
Drill diameter d₀	8 [mm]
Anchor length l	110 [mm]
Min. drill hole depth h₁	50 [mm]
Max. fixture thickness t _fix	— [mm]
Packaging	Folding box
Amount	250 [pcs.]
GTIN (EAN-Code)	4048962246957

DIBt-approval
Drill diameter d₀	8 [mm]
Anchor length l	140 [mm]
Min. drill hole depth h₁	50 [mm]
Max. fixture thickness t _fix	— [mm]
Packaging	Folding box
Amount	250 [pcs.]
GTIN (EAN-Code)	4048962246964

DIBt-approval
Drill diameter d₀	8 [mm]
Anchor length l	170 [mm]
Min. drill hole depth h₁	50 [mm]
Max. fixture thickness t _fix	100 - 130 [mm]
Packaging	Folding box
Amount	250 [pcs.]
GTIN (EAN-Code)	4048962246971

DIBt-approval
Drill diameter d₀	8 [mm]
Anchor length l	200 [mm]
Min. drill hole depth h₁	50 [mm]
Max. fixture thickness t _fix	— [mm]
Packaging	Folding box
Amount	250 [pcs.]
GTIN (EAN-Code)	4048962246988