fischer TermoFix PN 8/195

Name: fischer TermoFix PN 8/195
Brand: fischer

Product Variant

Download of image data

The economical ETICS hammerset anchor with plastic nail

Advantages

Optimised retention forces thanks to the glass fibre reinforced plastic nail (GRP).
The small anchoring depth of 35 mm saves on drilling times.
The approved fixing is free of thermal bridges thanks to the GRP nail.
The compression zone in the shank allows the disc to be pulled into the insulation.
The disc fits tight to the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials.
For insulating material thicknesses up to 180 mm.
The hammerset anchor has an ETA approval for the building material classes A, B and C.

The approved fischer TermoFix PN 8 is ideal for fixing pressure-resistant insulation for ETIC up to 180 mm thick such as polystyrene boards, mineral wool boards, wood shaving lightweight panels and PU panels in concrete, aerated concrete, solid and hollow building materials. The structural fixing comprises a white plug sleeve with attached disc and a plastic nail. The TermoFix PN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The nail, made from glass-fibre reinforced plastic (GFK), guarantees optimum holding forces and fixing without thermal bridges. Thanks to the flat plug disc, a cheap, thin reinforced plaster layer can be applied.

Applications

Mounting of ETICS insulation boards on concrete and masonry
Surface-flush mounting of ETICS insulation boards e.g. made of mineral wool, polystyrene or wood fibre with a maximum insulation thickness of 180 mm

Building materials

Building material classes A, B, C
Concrete
Brick
Solid sand-lime brick
Lightweight concrete solid block
Lightweight concrete hollow block
Vertically perforated brick
Perforated sand-lime brick

You can find detailed information on building materials in the approval document.

Approval

ETA-23/0453
DoP No. 0345

ETA-approval
Drill diameter ( d₀ )	8 mm
Anchor length ( l )	197 mm
Min. effect. anchorage depth ( h_ef )	25 mm
Max. fixture thickness ( t_fix )	170 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962441659

fischer TermoFix PN 8/195

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading