fischer Render fixing FIF-CN II 8/100

Name: fischer Render fixing FIF-CN II 8/100
Brand: fischer

Varianty výrobku

Download of image data

Top Features

Fewer plugs per square metre: high load absorption due to innovative plastic nails with steel tips.
Hammerset installation saves time.
Low setting depth reduces amount of drilling. This saves time and costs.
No premature expansion of hammer-in stop.
No marks on the plaster surface. Glass fibre reinforced plastic nail with steel point reduces heat transmission.

The pre-assembled anchor with innovative steel-plastic nail.

Advantages

To set with few hammer blows.
The plate fits tight into the insulation thanks to its thickness of only 2.7 mm. Thus allows the application of low-cost, thin reinforcement layers.
High retention forces thanks to the steel tip of the compound nail.
Small anchoring depth of 35 mm saves on drilling times.
The compression zone in the shank allows the plate to be drawn in precisely.
For insulating material thicknesses up to 340 mm.

The ETA approved fischer render fixing FIF-CN II is ideal for securely fixing pressure-resistant insulation up to 350 mm thick in the plaster façade such as polystyrene boards, mineral wool boards, wood wool lightweight panels and cork boards / coir matting in concrete, solid and perforated brick. The render fixing comprises a grey plug sleeve with attached preshaped octogonal disc and a steel-plastic nail. The FIF-CN II is set using a hammer. The innovative plastic nail with a steel point supports high loads.

Applications

Fixing of ETICS insulation boards on concrete and masonry
Flush-to-surface installation in ETICS insulating materials like mineral wool or polystyrene

Building materials

Building material classes A, B, C, D, E
Concrete
Full blocks made from concrete
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

* Bližší informace hledejte v certifikačních dokumentech nebo žádejte na našem technickém oddělení.

Certifikáty

ETA-18/0393
DoP No. 0255
EPD-FIW-20210314-CBD1-EN

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	45 mm
Anchor length ( l )	148 mm
Max. fixture thickness ( t _fix )	110 mm
Disc ø	60 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962329933

fischer Render fixing FIF-CN II 8/100

Výhody / popis

Použití a certifikáty

Návod k montáži

Technické údaje

Dokumenty ke stažení