Name: fischer TermoFix 6H-NT 300
Brand: fischer

The ETIC screw fixing for panel building materials with approved screw.

Advantages

Pre-fitted fixing with the approved fischer screw. This guarantees safe retention in the substrate.
The minimum screw-in depth of 30 mm guarantees fast assembly. There is no need to pre-drill the hole.
Plugs are enclosed in every packaging unit.
The fixing discs can be combined with the large insulating discs DT 90, DT 110 and DT 140 when very soft insulating materials are used.
Countersinkable assembly using the TTS assembly tool is possible in soft materials such as polystyrene rigid foam boards PS 15 or PS 20.
For insulating material thicknesses up to 280 mm.

The fischer screw fixing TermoFix 6H-NT is ideal for fixing pressure-resistant insulation up to 280 mm in wood and panel building materials. The screw fixing comprises a support disc made from polyamide with a prefitted fischer screw with approval. The minimal embedment depth of 30 mm ensures fast installation. The TermoFix 6H-NT is set flush to the surface in the push-through installation with a cordless powerdriver without pre-drilling. The head is them sealed with the screw plug. Optionally, the TermoFix 6H-NT can be countersunk with the fisher setting tool TSS. The insulation disk is then covered with a round cap.

Applications

Attachment of ETICS insulating boards on wooden substructures
Flush installation in ETICS insulating materials e.g. polystyrene
Flush-to-surface installation in wooden soft fibre boards

Building materials

MDF boards
OSB boards
Chipboard
Gypsum fibreboard
Solid wood

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

EPD-FIW-20210314-CBD1-EN

Functionality

The fixing is inserted using a standard TX30 bit for flush installation.
The TSS assembly tool is required for countersunk installation. This is used for precise positioning and screwing of the fixing. Thecounterbore is sealed using an insulating disc available, resulting in a level insulating material surface.
The disc of the TSS assembly tool can also be turned and used for flush-to-surface installation. This prevents the disc from being set too deep.

Countersunk installation with TSS setting tool

1 / 4

1
2
3
4

Flush to surface installation with TX30 bit

1 / 3

1
2
3

Anchor length ( l )	300 mm
Disc ø	60 mm
Screw diameter ( d_s )	6.0 mm
Anchorage depth ( h_ef )	30 mm
Usable length at surface-flush installation ( t_fix )	270 mm
Effective length with recessed mounting ( t_fix )	285 mm
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4048962184228

fischer TermoFix 6H-NT 300

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Tehnički podaci

Dokumenti za preuzimanje