Optimised plaster adhesion due to open plate geometry.
Can be flexibly combined with different screw lengths.
Closing cap included in the standard delivery.
Productomschrijving
The disc element for use with standard screws
Advantages
The polystyrene plugs are included with the disc element TermoFix H 10.
In case of disc elements TermoFix H 50, 90 and 150 the disc is sealed using the sealing cap moulded on.
An air column is produced between the screw head and this seal. This reduces thermal-transmission losses.
Extremely economical thanks to different shank lengths. This allows the screw length to be reduced if necessary.
Can be combined with the insulating discs DT 90, DT 110 and DT 140.
The fischer TermoFix H plate elements enable the flexible fixing of all common insulation boards to wood and board materials with standard screws. Thanks to the possibility of combining the different shaft lengths with different screw lengths, any insulation thickness can be fastened securely.
Toepassing en goedkeuring
Applications
Fixing of ETICS insulation boards with standard screws
Building materials
Panel building materials
Solid wood
De details (bouwmaterialen, belastingen, etc.) van de beschikbare goedkeuring zijn van toepassing.
Certificering
EPD-FIW-20210314-CBD1-EN
Montage instructies
Functionality
The fixing (disc and screw) is set in push-through installation.
Non-load-bearing layers such as adhesive and old plaster should not serve as an anchoring base.
