Unique material combination of nylon base body and metal sleeve for high load requirements.
The optimised nylon anti-rotation lock prevents damage to the building material.
Glass-fibre reinforced dowel tip for high stability during tightening torque.
One plug length is suitable for several building material thicknesses from 9.5-30 mm for a cost-efficient application.
Function
The DuoHM is suitable for panel thicknesses of 9.5 - 30 mm.
The cavity fixing is mounted as a push-fit installation, i.e. the screw is installed directly through the attachment part.
The metal sleeve folds behind the building material and presses against the back of the panel, the nylon base body knots in the building material.
Installation is only complete when the tightening torque is clearly noticeable and the metal sleeve is fully pressed against the panel.
Thanks to the metric internal thread, the attachment can be fastened and unfastened several times.
Benefits at a glance
The DuoHM can be mounted quickly and easily using a cordless screwdriver without additional setting tools. This reduces the installation time by up to 50% compared to conventional panel anchors.
The unique 2-component technology meets high load requirements. The metal sleeve presses against the back panel and the nylon base body knots into the building material.
One anchor length covers all common building material thicknesses from 9.5 - 30 mm for flexible and cost-efficient application.
Due to the metric internal thread, the screw can be loosened several times and screwed in again.
The nylon anti-rotation device ensures correct installation and also prevents damage to the building material.
Due to the narrow edge of the dowel, the attachment behind the add-on part is no longer visible.
Installation - DuoHM vs. conventional cavity anchors
DuoHM assembly
The DuoHM can be installed directly through the attachment part without special tools using a standard cordless screwdriver. This saves up to 50% installation time compared to conventional cavity plugs. In addition, one plug length is sufficient for different building material thicknesses from 9.5 to 30 mm and attachments can be unscrewed and screwed in again several times thanks to the metric thread. The DuoHM is therefore the flexible and economical cavity plug for a wide range of panel building materials.
Conventional cavity anchor
Comparable plugs have to be set laboriously and tediously with pliers in order to achieve full expansion of the plug behind the panel. The screw must then be completely unscrewed in order to fix the attachment. Due to the sharp-edged anti-rotation lock, the surface of the building material often gets damaged. In addition, different plug dimensions are required depending on the panel thickness.
Recommendation:
Suitable for building materials such as:
Plasterboard and OSB boards
Chipboards
Plywood panels
Plasterboard and gypsum fibreboard
Areas of usage
Pictures
Ceiling lights
Curtain rods
Shelves
Mirrors
TV mountings
One plug length for different building material thicknesses.
