Application picture
Application picture
1   1

fischer ETICS adhesive foam Premium PUP 750

The adhesive foam for ETICS systems with building approval.

Art.-No. 539164
Top Features
  • Building approval for bonding EPS boards in ETIC systems.
  • High adhesion strength for safe ETICS bonding.
  • High yield.
  • Low post-expansion.
  • Easy application with foam gun.

Sales to



Product Description

The fischer ETICS gun adhesive foam Premium PUP WDVS 750 has building approval and is suitable for the bonding of EPS panels in thermal insulation composite systems. The special recipe guarantees high adhesive pull strength. The high yield makes the foam particularly cost-effective. In addition, the adhesive foam can be used for the bonding of insulation panels in the perimeter area, for inner wall insulation and for the insulation of cellar ceilings. The very low level of post-expansion prevents the formation of cavities and guarantees a reliable bond. Protective gloves for end users are included.
  • The special recipe guarantees high adhesive tensile strength for secure fixing.
  • The high foam yield allows for the bonding of up to 12 m² of wall space and is therefore especially economical.
  • Really low post-expansion avoids the formation of cavities between the wall and insulation panel and guarantees a secure connection.
  • The use of the can/gun system provides a time saving of approx. 30% and thus guarantees efficient work.
  • The new non-sticking safety valve guarantees long-lasting functionality.

Application and Permission

  • Bonding of EPS rigid foam panels in accordance with ETAG Guideline 004/2013
  • Fixing of external wall insulation, internal wall insulation and attic insulation
  • Fixing of basement ceiling insulation
  • Bonding of perimeter insulation panels
Building materials
  • EPS-insulation panels
  • Concrete
  • Bitumen coatings
  • Anodised layer
  • Gypsum plasterboard
  • Wood
  • Cold bitumen sheeting
  • Plastics (not on PE, PP, Teflon, silicone)
  • Masonry
  • Metals with priming coat
  • Plaster
* You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

  • 1-component PU foam
  • Foam yield sufficient  for up to 12 m² wall area
  • Processing temperature environment: +5 °C to +25 °C (can temperature: +10 °C to +25 °C)
  • Open Time approx. 10 minutes
  • Can be cut after approx. 20 minutes
  • Temperature resistant  from -40 °C to +90 °C
  • Extremely high heat insulation properties
  • Shear resistance (EN 12090) 38,7 kPa
  • Fresh foam stains can be removed immediately with fischer PU cleaner.
  • When pressed on, an adhesive surface percentage of at least 40% must be achieved.
  • Do not knock the insulation panels against the wall (this damages the foam structure).

Technical Data

Technical Data

Content per can 750 [ml]
Max. foam yield up to 12 [m²]
Amount 1 Unit(s)
GTIN (EAN Code) 4048962268508

Documents for Downloading