Stand-off installation and compensation of panel thickness tolerances for highest visual requirements.
The integrated suspension nut combined with the suspension clasps Vertical Solution enable an easy panel installation (keyhole principle)
For all natural stones class I-IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of stainless steel.
Your advantages / Product description
The suspension anchor with the fischer Vertical Solution for natural stone façade panels.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
The concealed stand-off installation solution using undercut anchors for heavy natural stone façade panels. This anchor can only be used with the fischer Vertical Solution subframe system. Suspension brackets designed based on a lock and key principle are used to install the undercut anchors. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses and create a flat façade surface by stand-off installation anchors.
Application and approval
Exterior façades with high aesthetic requirements and a reduced wall construction
Interior façades with high aesthetic requirements and a reduced wall construction
Natural stone (>20mm)
You can find detailed information on building materials in the approval document.
DoP No. 0261
DoP No. 0307
DoP No. 0322
The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
The anchor is installed stand-off installation.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Suspension brackets designed on a lock and key principle are also used during installation
Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools