Fixed/sliding point wall holder ATK 100 with hole 10,5 mm.
The L-wall holder of the BWM subframe system ATK 100 made of stainless steel is the basis for a façade subframe. It is fastened to the building substrate using fischer fixings. Due to its optimised structural-physical properties, no thermal separating element is necessary. In order to enable all common insulation thicknesses and façade offsets, the wall holders are designed and manufactured in different projection lengths. To allow the thermal expansion of the profiles, the wall holders are used both as fixed and sliding points. The fixed point absorbs the entire dead loads of the façade panels and subframe system in addition to the proportional wind loads. With its slotted holes, the sliding point also ensures that the vertical profile can slide due to thermal expansion. The sliding point is also used to transfer wind loads. These fixed/sliding points suit both applications.