Name: fischer Wall holder FLH 260x80x3/1x9/SP AL
Brand: fischer

Sliding point holder for ATK 100 with hole 9 mm.

Advantages

The L-shaped geometry of the wall holder ensures optimised load transfer.
The combination of wall holder and vertical profile ensures optimum compensation of tolerances in the building substrate.
Compatible with all common fixings and connectors (e.g. fischer frame fixings and steel anchors).
The predesigned hole pattern allows for quick and easy installation.
Flexible adjustment of the vertical profile possible due to innovative helping hand clip on the wall holder.

The L-wall holder of the BWM subframe system ATK 100 made of aluminum is the basis for a façade subframe. It is fastened to the building substrate using fischer fixings. To reduce thermal bridges, thermostops made of hard-PVC can be attached to back of the wall holders. In order to enable all common insulation thicknesses and façade offsets, the wall holders are designed and manufactured in different projection lengths. To allow the thermal expansion of the profiles, the wall holders are used both as fixed and sliding points. With its slotted holes, the sliding point also ensures that the vertical profile can slide due to thermal expansion. The sliding point is also used to transfer wind loads.

Properties

Aluminum (e. g. EN AW 6063, 6061)

Applications

As an angular L-shaped wall holder made of aluminium for the vertical subframe system ATK 100
For load transfer into the building substrate of subframe systems in ventilated rainscreen façades

Building materials

All building substrates

De details (bouwmaterialen, belastingen, etc.) van de beschikbare goedkeuring zijn van toepassing.

Certificering

DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared

Gecreëerd op 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations

Gecreëerd op 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party

Gecreëerd op 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party

Gecreëerd op 05/08/2024

Length ( L )	260 mm
Width ( W )	40 mm
Height ( H )	80 mm
Thickness ( T )	3 mm
Dimensions ( d )	9x20 mm
Hole pattern	1x 9x20 mm
Hole pattern profile	2x 5.5x25 mm
Angle	90 °
System	—
Contents	50 x Wall bracket
Amount	1 pcs
GTIN (EAN-Code)	4048962418354
BWM	269080

fischer Wall holder FLH 260x80x3/1x9/SP AL

Productomschrijving

Toepassing en goedkeuring

Montage instructies

Technische gegevens

Documenten om te downloaden