Vertical hat profile for ATK 101.
The vertical hat profile is a component of the BWM subframe system ATK 101. It is used for vertical load transfer of the façade systems and is connected to the FUH wall holders with system rivets. To enable the thermal expansion of the profile, a difference is made between slotted holes (sliding points) and fixed points during fastening. Together with the FUH wall holders and their length, the geometry of the vertical profile determines the façade offset. This system can also compensate for tolerances of the building substrate. The direct fixing of façade panels to the vertical profiles can be visibly riveted/screwed or invisibly glued. In addition, the profiles can be used as a spacer substructure and as a base structure (e.g. for horizontal systems for concealed fixings). Different geometries allow applications for all cladding materials. The profiles are available in 6 m lengths as standard.
