Art.-No. 565317
GTIN (EAN-Code): 4048962384321
fischer Clasps FHC 30x3 36/6,5/FP AL EPDM
Top Features
- Quick and easy suspension of the clasps.
- Easy panel adjustment with adjustment screw.
- Fixation of the clasp as a fixed point with fixation clamp.
- Compatible with horizontal profiles ATK 103 T.
- Minimal hang in distance.
Your advantages / Product description
Fixed point clasp for ATK 103 T with hole 6,5 mm and EPDM.
Advantages
- Clasps can be pre-assembled, saving time on the construction site.
- Fast and easy installation of façade panels thanks to the coordinated geometries of the clasps and horizontal profiles.
The fixed point clasps of the BWM horizontal subframe system ATK 103 are made of an open C-profile and represent the geometric counterpart to the ATK 103 horizontal profiles. This combination allows the façade panels, which are fastened with undercut anchors, to be suspended quickly and efficiently. In addition to the dead load of the façade panel, the fixed point clasps also absorb wind loads proportionally and transfer these to the horizontal profiles. Thanks to the hole on the upper side, the clasps can be adjusted with an additional adjustment screw. The fixed point is created by adding the associated U-profiles.
Properties
- Aluminum (e. g. EN AW 6063, 6061)
Application and approval
Applications
- As a suspension element in the horizontal profile for subframe systems ATK103 and SystemOne BS in ventilated rainscreen façades.
- As suspension clasps for suspension nuts for pure vertical substructure systems for ventilated curtain walls.
Building materials
- Natural stone (≥ 20mm)
- Artificial concrete panels (e.g. GFRC, UHPC, etc.)
- Ceramics
- Porcelain stoneware
- Fibre cement
- HPL panels
- Solid surface panels
- Thin panel materials (≥ 8 mm)
Approval
- DoP: BWM-LE-005
- DoP: BWM-LE-006
- DoP: BWM-LE-007
- DoP: BWM-LE-008
Assembly instruction
Functionality
- Load transfer to the building substrate (dead weight and wind)
- Absorption of loads through the connection to the undercut anchors
- Easy installation with conventional fixings and undercut anchors
Installation clasps FHC ATK103
1 / 4
- 1
- 2
- 3
- 4
Technical Data
| System | — |
| Width ( W ) | 36 mm |
| Height ( H ) | 76 mm |
| Depth ( D ) | 30 mm |
| Thickness ( T ) | 3 mm |
| Hole-ø ( D ) | 6,5 mm |
| Thread ( M ) | M6 |
| Colour | Aluminium |
| Amount | 1 pcs |
| Contents | 125 x Clasps with EPDM coating, 125 x adjustment screw, 125 x fixation, 125 x fixation screw |
| GTIN (EAN-Code) | 4048962384321 |
| BWM | 68031 |
Documents for Downloading
- ETAs and DoPs
DOP - Declaration of Performance
pdf, DoP: BWM-LE-005
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared
Created on 05/08/2024
DOP - Declaration of Performance
pdf, DoP: BWM-LE-006
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations
Created on 05/08/2024
DOP - Declaration of Performance
pdf, DoP: BWM-LE-007
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party
Created on 05/08/2024
DOP - Declaration of Performance
pdf, DoP: BWM-LE-008
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party
Created on 05/08/2024