Name: fischer Clasps FHC 20x2 36/6,5/FP AL
Brand: fischer

Fixed point clasp for ATK 103 P20 or S20 for FZP II M6.

Advantages

Clasps can be pre-assembled, saving time on the construction site.
Fast and easy installation of façade panels thanks to the coordinated geometries of the clasps and horizontal profiles.

The fixed point clasps of the BWM horizontal subframe system ATK 103 are made of an open C-profile and represent the geometric counterpart to the ATK 103 horizontal profiles. This combination allows the façade panels, which are fastened with undercut anchors, to be suspended quickly and efficiently. In addition to the dead load of the façade panel, the fixed point clasps also absorb wind loads proportionally and transfer these to the horizontal profiles. Thanks to the hole on the upper side, the clasps can be adjusted with an additional adjustment screw. The fixed point is created by adding the associated U-profiles.

Properties

Aluminum (e. g. EN AW 6063, 6061)

Applications

As a suspension element in the horizontal profile for subframe systems in rainscreen façades.
As suspension clasps for suspension nuts for pure vertical substructure systems for ventilated curtain walls.

Building materials

Natural stone (≥ 20mm)
Artificial concrete panels (e.g. GFRC, UHPC, etc.)
Ceramics
Porcelain stoneware
Fiber cement
HPL panels
Solid surface panels
Thin panel materials (≥ 8 mm)

You can find detailed information on building materials in the approval document.

Approval

DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared

Created on 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations

Created on 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party

Created on 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party

Created on 05/08/2024

System	—
Dimensions ( d )	6.5 mm
Width ( W )	36 mm
Height ( H )	62 mm
Depth ( D )	20 mm
Thickness ( T )	2 mm
Hole-ø ( D )	6,5 mm
Thread ( M )	M5
Colour	Aluminium
Amount	1 pcs
Contents	125 x Clasps 125 x Adjustment screw 250 x U-fixation 250 x Fixation screw
GTIN (EAN-Code)	4048962383614
BWM	28236

fischer Clasps FHC 20x2 36/6,5/FP AL

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading