Injection mortar
  • Product Category Picture: "Injection mortar FIS RC II"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The cost-efficient injection mortar for post-installed rebar connections.

      Injection mortar FIS RC II

      The fischer RebarConnect FIS RC II injection mortar is the economical choice for post-installed rebar connections. With the injection system, ø 8-40 rebar connections with an anchoring depth of up to 2 metres can be carried out. In combination with the matching hollow drill, borehole cleaning is no longer required as an additional work step for fast installation. The processing of the FIS RC II is regulated from -10°C to +40°C in the ETA.
      Product Variant
      Download of image data

      Product Variant

      Approvals / Test reports
      11 product variants
      Language on label
      Scale unit
      Contents
      Packaging
      Amount
      GTIN (EAN-Code)
      Legend = Permission Available— = Permission not Available
      Viewed 11 of 11 variant (s)

      Your advantages / Product description

      Advantages
      • The European Technical Assessment (ETA) permits post-installed rebar connection with rebars from ø 8-40 mm and embedment depths up to 2 m including seismic applications.
      • The short processing and curing times ensure fast working progress.
      • Processing in different substrate temperatures from -10°C to +40°C allows universal use.
      • The injection mortar Rebar Connect FIS RC II allows flexible application with hollow or hammer drills.
      • In addition, the FIS RC II is approved for post-installed rebar connections with a service life of 100 years.

      Application and approval

      Applications
      • Post-installed rebar connections
      Building materials
      • Concrete C12/15 to C50/60, cracked and non-cracked
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-22/0501
      • ETA-22/0502
      • DoP No. 0309
      • DoP No. 0365

      Assembly instruction

      Functionality
      • Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when the injection cartridge is ejected.
      • In combination with the suitable hollow drill, there is no need for drill hole cleaning.
      • The injection cartridges can be applied quickly and with minimum effort using the fischer dispenser.
      • The reinforcement bar is set by hand with a slight rotating movement down to the bottom of the drill hole.
      • The mortar fully bonds the reinforcement bar to the drill hole wall and seals the borehole.
      • Opened cartridges can be reused by changing static mixers.
      Installation in concrete with FIS RC II in hammer drilled holes
      1 / 8
      • 1
        Installation in concrete with FIS RC II in hammer drilled holes
      • 2
      • 3
      • 4
      • 5
      • 6
      • 7
      • 8

      Documents for Downloading

      • ETAs and DoPs
      • Safety data sheets
      • Technical documents
      • Sales materials
      ETA Certification Document
      pdf, ETA-22/0501
      European Technical Assessment for fischer Rebar connection with injection system FIS RC II - Bonded fastener for use in concrete
      Created on 09/20/2022
      DOP - Declaration of Performance
      pdf, DoP No. 0309
      Declaration of Performance for fischer injection system FIS RC II (Bonded fastener for use in concrete)
      Created on 10/24/2022
      ETA Certification Document
      pdf, ETA-22/0502
      European Technical Assessment for fischer Rebar connection with injection system FIS RC II - Systems for post-installed rebar connections with mortar
      Created on 06/10/2024
      DOP - Declaration of Performance
      pdf, DoP No. 0365
      Declaration of Performance for fischer injection system FIS RC II (Mortar for post-installed rebar connections)
      Created on 06/24/2024
      cd-green-64c8fdbcdb-24hwn