Polyester resin without approval for use in masonry.
Can be used with anchor rods FIS A, internal threaded anchor FIS E and fischer anchor sleeves.
Your advantages / Product description
The reliable injection mortar for anchorings in masonry
The FIS P is the economical solution for anchorings in masonry that do not require approvals.
The FIS P 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. This helps to reduce procurement costs.
The fischer Injection mortar FIS P is a polyester resin mortar for the economical fixing of gratings, cantilevers and handrails in masonry which do not require approval. The FIS P is processed with the system components fischer threaded rod FIS A, fischer internal threaded rod FIS E together with the fischer injection anchor sleeves indoors and outside. Cartridges already opened can be reused by simply changing the static mixer. This saves time and money during installation.
Application and approval
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Solid brick made from lightweight concrete
You can find detailed information on building materials in the approval document.
The FIS P is a 2-component injection mortar based on polyester resin.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
The mortar is extruded bubble free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
Partially used cartridges can be reused by changing the static mixer.