FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.
The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
For rebar connections from diameter 8 to 40 mm.
Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
FIS EM Plus is to be processed at temperatures down to -5°C.
More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.
Your advantages / Product description
The powerful injection mortar for rebar connections and cracked concrete
The ETA assessment guarantees a service life of 100 years. The expert report of IEA Stuttgart even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
The optimised formulation of the epoxy resin mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
The mortar can be used for rebar connections from diameter 8 to 40, including seismic applications.
With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.The mortar is approved for diamond drilled and water-filled drillholes as well as seismic applications and thus offers safety under extreme conditions.
For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5°C.
The fischer injection mortar FIS EM Plus 585 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, or heavy-duty steel constructions.
Application and approval
Post-installed rebar connections
Jointers for concrete layers
Rim beam anchorings
Anchorings in diamond-drilled or in waterfilled drill holes
Heavy steel constructions
Temporary or removable fixings (with internal threaded anchor RG M I)
Anchorings in sealing surfaces according to WRL (Water Ressources Law)
Approved for anchorings in:
Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
Natural stone with dense structure
You can find detailed information on building materials in the approval document.
DoP No. 0190
DoP No. 0218
DoP No. 0236
DoP No. 0308
Report No MRF 19 26082687/C
The epoxy mortar FIS EM Plus combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
The mortar is injected bubble-free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
The anchor is set manually by lightly rotating it until it reaches the drill hole base.
During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM Plus.
Languages on the cartridge
EN, ZH, KO
1 cartridge 585 ml, 1 x FIS UMR, 1 x extension tube Ø 9x250 mm
European Technical Assessment for fischer injection system FIS EM Plus - Post-installed reinforcing bar (rebar) connections with improved bond-splitting behaviour under static loading and seismic action