Surface flush removal enables fixing point to be reused.
Conventional screws and threaded rods can be used. This lowers costs and complexity.
ETA approval for maximum safety.
Suitable for anchorage in cracked and non-cracked concrete in combination with various mortar cartridges or injection mortars.
Your advantages / Product description
The fixing system with internal threaded anchor for cracked and non-cracked concrete.
The internal threaded anchor RG MI is suitable for use with resin capsules or injection mortars in concrete.
The internal threaded anchor RG MI allows for the surface-flush removal and reuse of the fixing point. It therefore offers great flexibility.
The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
Please refer to the approvals of the resin capsules and injection mortar used.
The internal threaded anchor RG M I is made of zinc-plated steel. The internal threaded anchor is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the RG M I through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the internal threaded anchor is pushed into the drill hole manually by lightly rotating it. The various mortars bond the entire surface of the RG M I with the drill hole wall. The internal threaded anchor can be removed when surface-flush and is, for example, mainly suitable for temporary fixings such as for machines in internal areas.
Application and approval
Removable and temporary fixings
Anchorings with resin capsules RSB and RM II (without approval)
Anchorings with injection mortars FIS SB, FIS EM, FIS V, FIS VL, and FIS Green in concrete (without approval)
Concrete, cracked and non-cracked
You can find detailed information on building materials in the approval document.
For use in conjunction with resin capsules:
The internal threaded anchor RG M I is set using a hammer drill and the accompanying setting tool in rotating and hitting motions.
During setting, the oblique edge of the internal threaded anchor destroys the capsule, and mixes and activates the mortar.
For use in conjunction with injection mortars:
The RG M I is set manually by lightly rotating it until it reaches the drill hole base.
The mortar bonds the entire surface of the internal threaded anchor with the drill hole wall and seals the drill hole.