The economical solution in cracked concrete.

Highbond anchor FHB II-A L Inject

The Highbond anchor rod FHB II-AL Inject R is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AL Inject R for example guard rails and steel brackets are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Product Variant

Download of image data

Product Variant

Zulassungen / Prüfberichte

8 Produktvarianten

Drill diameter

Drill hole depth

Anchorage depth

Max. fixture thickness

Thread

Width across nut

Legende = Zulassung vorhanden— = Zulassung nicht vorhanden

Gesehen 8 von 8 Variante(n)

Keine Produkte gefunden

Für Ihre Filter konnten leider keine Produkte gefunden werden

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AL Inject R (long version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

Functionality

The FHB II-AL Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
For FHB II-AL Inject, the annular gap must be filled with Highbond special mortar FIS HB in case of push-through installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Pre-positioned Installation in concrete with FIS HB

1 / 9

Push-through installation in concrete with FIS HB

1 / 9

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	101 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t_fix )	10 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs
GTIN (EAN-Code)	4048962272963

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	101 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t_fix )	20 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs
GTIN (EAN-Code)	4048962272970

ETA-approval
Drill diameter ( d₀ )	14 mm
Drill hole depth ( h₀ )	106 mm
Anchorage depth ( h_ef )	100 mm
Max. fixture thickness ( t_fix )	25 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 pcs
GTIN (EAN-Code)	4048962272987

ETA-approval
Drill diameter ( d₀ )	14 mm
Drill hole depth ( h₀ )	126 mm
Anchorage depth ( h_ef )	120 mm
Max. fixture thickness ( t_fix )	25 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 pcs
GTIN (EAN-Code)	4048962272994

ETA-approval
Drill diameter ( d₀ )	18 mm
Drill hole depth ( h₀ )	131 mm
Anchorage depth ( h_ef )	125 mm
Max. fixture thickness ( t_fix )	30 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 pcs
GTIN (EAN-Code)	4048962273021

Highbond anchor FHB II-A L Inject

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading