Art.-No. 60787

fischer ZYKON internal thread anchor FZA 18 x 80 M10 I R stainless steel

Top Features

Maximum safety due to a positive fit connection.
High flexibility due to using conventional metric screws and threaded rods.
Fast installation, no exchanging tools. This saves time and costs.
ETA approval for cracked concrete and fire resistance class R 120.
Made of stainless steel for fixings used outside.

The internally threaded anchor consists of stainless steel for optimum safety in cracked concrete.

Advantages

The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks.
The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The FZA-I allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility.
Furthermore, the ZYKON undercut anchor FZA-I offers all the benefits of the FZA.

The fischer ZYKON internal threaded anchor FZA-I is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON internal threaded anchor FZA-I is ideal for fixing steel constructions, staircases, and temporary fixings within external areas in cracked concrete.

ETA Certification Document

pdf, ETA-98/0004

European Technical Assessment for fischer-Zykon-Anchor FZA, FZA-D, FZA-I, FZA ST - Mechanical fasteners for use in concrete

Created on 06/16/2021

DOP - Declaration of Performance

pdf, DoP No. 0208

Declaration of Performance for fischer Zykon-Anchor FZA, FZA-D, FZA-I, FZA ST (Mechanical anchor for use in concrete)

Created on 06/30/2021

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

Swiss shock certifcate

pdf, BZS D 06-605

Approval for fischer ZYKON undercut anchor FZA, FZA-D, FZA-I / M6 - M16

Valid from 07/12/2016
to 12/31/2026

Installation Instructions

pdf,

Installation Instructions fischer Zykon-Anchor

Load Table

pdf,

ZYKON internally-threaded anchor FZA-I - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Accessories

ETA-approval
DIBt-approval
Required drill bit FZUB	18 x 80
Required setting tool	FZE 18 plus
Drill diameter ( d₀ )	18 mm
Min. bolt penetration ( l_E,min )	13 mm
Max. bolt penetration ( l_E,max )	21 mm
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209607879

fischer ZYKON internal thread anchor FZA 18 x 80 M10 I R stainless steel

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading