Art.-No. 48410

fischer hammerset anchor EA II M6 stainless steel R

Top Features

Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
Use of standard metric screws and threaded rods lowers complexity.
Power-saving series installation with machine setting tool EA II S-SDS.
ETA approval for non-cracked concrete.
Made of stainless steel for fixings used outside.

The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation.

Advantages

The embossed edge prevents the anchor sleeve from slipping, thus allowing trouble-free hammerset installation.
The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
The machine setting tool EMS allows for effortless installation, particularly in the case of series installations.
The embossing that is applied when expanding with the Setting tool EHS Plus offers a simple control of the anchoring and provides increased safety.
Fixing point on hef 25 mm against inadvertent of the anchor before expansion.
Ideal for applications with high load requirements.

The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval.

Applications

Sprinkler systems
Steel constructions
Machines
Consoles
Shuttering props

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the approval document.

Approval

ETA-07/0135
ETA-07/0142
DoP No. 0291
DoP No. 0292
DoP No. 0756-CPD-0332

Functionality

The EA II is suitable for pre-positioned installation.
Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
The setting tools must sit on the rim of the anchor to ensure correct expansion.

Installation EA II

1 / 7

ETA Certification Document

pdf, ETA-07/0135

European Technical Assessment for fischer drop-in anchor EA II - Mechanical fasteners for use in concrete

Created on 10/20/2021

DOP - Declaration of Performance

pdf, DoP No. 0291

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Created on 10/27/2021

ETA Certification Document

pdf, ETA-07/0142

European Technical Assessment for fischer drop-in anchor EA II - Fasterners for use in concrete for redundant non-structural systems

Created on 09/24/2021

DOP - Declaration of Performance

pdf, DoP No. 0292

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Created on 09/30/2021

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0332

Declaration of Performance for fischer Drop-in anchor EA II

Valid from 06/11/2013
to 06/12/2028

Load Table

pdf,

Hammerset anchor EA II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in pre-stressed hollow core slabs of concrete C30/37 up to C50/60.

Accessories

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. bolt penetration ( l_E,min )	6 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209484104

fischer hammerset anchor EA II M6 stainless steel R

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading