Product Category Picture
Application Picture
Application Picture
1   1

Bolt anchor EXA-IG

The installation-friendly fixing with internal thread for non-cracked concrete

The fischer bolt anchor EXA is a particularly installation-friendly steel anchor with an internal thread for anchorings in non-cracked concrete. The two expansion clips increase the expansion range and reduce the torque slippage. In the stainless steel design, the bolt anchor with internal thread is suitable for the anchoring of railings, cantilevers, and cable trays outside. Thanks to the internal thread, threaded rods and metric screws for fixture anchoring can be installed and removed with a low amount of effort.

Product Description

Advantages
  • The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the fixture.
  • The short version EXA K*) can be used in thinner components due to the low anchorage depth.

*) not covered by technical approval

Available Product Variants


8 Product variant (s) found

8 Product variant (s) found

Variant
Drill diameter

d0

Total length

l

Thread

Ø x length

Min. drill hole depth for pre-positioned installation

h1

Art.-No. 512258

8 [mm]

48 [mm]

M6 [mm]

60 [mm]

Art.-No. 512259

10 [mm]

50 [mm]

[mm]

60 [mm]

Art.-No. 512260

12 [mm]

53 [mm]

M10 [mm]

65 [mm]

Art.-No. 512262

16 [mm]

85 [mm]

M12 [mm]

95 [mm]

Art.-No. 512263

8 [mm]

48 [mm]

M6 [mm]

60 [mm]

Art.-No. 512264

10 [mm]

50 [mm]

[mm]

60 [mm]

Art.-No. 512265

12 [mm]

53 [mm]

M10 [mm]

65 [mm]

Art.-No. 512266

16 [mm]

85 [mm]

M12 [mm]

95 [mm]

Viewed 8 of 8 variant (s)
0

Application and Permission

Applications
  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
Building materials
Approved for:
  • Concrete C20/25 to C50/60, non-cracked
Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure
* You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality
  • The EXA is suitable for pre-positioned and push-through installation.
  • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
  • When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall.
  • In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Documents for Downloading

Additional Documents

System Components & Related Categories

fe80::8a8:18b8:f52e:7cbe%5