Product group image
Application picture
Application picture
1   1

Bolt anchor FAZ II

For highest demands. Powerful and flexible.

Product Description

The fischer bolt anchor FAZ II is a steel anchor for the highest requirements. Heavy loads can be secured in cracked concrete using the steel anchor. Thanks to its easy installation, the FAZ II can be used extremely flexibly. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables top load-bearing capacity. The steel anchor is ideal for the anchoring of railings, cable trays, and cantilevers, for example.
Advantages
  • According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
  • The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
  • The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
  • The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
  • The international approvals guarantee maximum safety and the best performance.

Application and Permission

Applications
  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
  • Timber constructions
Building materials
Approved for:
  • Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
  • Concrete C12/15
  • Concrete C80/95 (classification available)
* You can find detailed information on building materials in the registration document.

Permission

  • ETA-05/0069
  • DoP No. 0009
  • DoP No. 0081
  • DoP No. 0121
  • DoP No. 0756-CPD-0062
  • ESR-2948
For Details see corresponding Documents

Assembly Instruction

Functioning
  • The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
  • The anchor is set in line with the approval once the preset installation torque is achieved.
  • In the case of series installation, we recommend using the FABS anchor bolt setting tool.
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic

Documents for Downloading

Additional Documents

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 3 MB) ETA-05/0069 7/3/2017
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Anchor bolt FAZ II, according European Technical Assessment ETA-05/0069 DoP No. 0009 3/11/2015
DOP - Declaration of Performance (PDF, 2 MB) DoP No. 0081 8/16/2016
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance fischer Anchor bolt FAZ II, according European Technical Assessment ETA-05/0069 DoP No. 0121 7/10/2017
DOP - Declaration of Performance (PDF, 1 MB) DoP No. 0756-CPD-0062 5/14/2013
ICC-Approval (PDF, 1 MB) ESR-2948 1/1/2018 1/31/2020
Factory Mutual (PDF, 128 KB)

Drill diameter

[mm]

Material

Usable length

[mm]

Certification mark / Approvals

Available Product Variants

Product Variant ETA-approval ICC-approval Drill hole diameter d0 [mm] Min. drill hole depth for through fixings h2 [mm] Anchor length l [mm] Max. usable length hef,max./hef,min. tfix [mm] Thread Ø x length [mm] Width across nut SW [mm] Amount Unit(s) Seismic-Approval
FAZ II 6/10 Art.-No. 542621 - 6 60 65 10/- M 6 x 25 10 50
FAZ II 6/20 Art.-No. 542622 - 6 70 75 20/- M 6 x 35 10 50
FAZ II 6/10 A4 Art.-No. 542623 - 6 60 65 10/- M 6 x 25 10 50
FAZ II 6/20 A4 Art.-No. 542624 - 6 70 75 20/- M 6 x 35 10 50
FAZ II 8/10 Art.-No. 094871 8 65 75 10/20 M 8 x 38 13 50 C1
FAZ II 8/30 Art.-No. 094877 8 85 95 30/40 M 8 x 58 13 50 C1
FAZ II 8/50 Art.-No. 094878 8 105 115 50/60 M 8 x 78 13 50 C1
FAZ II 8/100 Art.-No. 094879 8 155 165 100/110 M 8 x 128 13 25 C1
FAZ II 8/160 Art.-No. 503251 8 215 225 160/170 M 8 x 100 13 20 C1
Legend   =   Permission Available —  =   Permission not Available
View
Display
Product Variant ETA-approval ICC-approval Seismic-Approval Drill hole diameter d0 [mm] Min. drill hole depth for through fixings h2 [mm] Anchor length l [mm] Max. usable length hef,max./hef,min. tfix [mm] Thread Ø x length [mm] Width across nut SW [mm] Amount Unit(s)
FAZ II 8/10 Art.-No. 094871 C1 8 65 75 10/20 M 8 x 38 13 50
FAZ II 8/30 Art.-No. 094877 C1 8 85 95 30/40 M 8 x 58 13 50
FAZ II 8/50 Art.-No. 094878 C1 8 105 115 50/60 M 8 x 78 13 50
FAZ II 10/10 Art.-No. 094981 C1 / C2 10 85 95 10/30 M 10 x 53 17 50
FAZ II 10/20 Art.-No. 094982 C1 / C2 10 95 105 20/40 M 10 x 63 17 25
FAZ II 10/30 Art.-No. 094983 C1 / C2 10 105 115 30/50 M 10 x 73 17 25
FAZ II 10/50 Art.-No. 094984 C1 / C2 10 125 135 50/70 M 10 x 93 17 20
FAZ II 10/80 Art.-No. 094985 C1 / C2 10 155 165 80/100 M 10 x 123 17 20
FAZ II 10/100 Art.-No. 094986 C1 / C2 10 175 185 100/120 M 10 x 143 17 20
Legend   =   Permission Available —  =   Permission not Available

System Components

10.209.131.17